Most new buildings are now using a variety of electrical and electronic equipment. As such, the contractors have to design a wiring schematic that will deliver power to a wide and diverse range of devices that include traditional and modern electrical loads.  The wiring must also provide a means of supplying power to the monitoring and control devices such as wireless sensors, thermostats, automatic light controls, thermostats, the IoT, and other web-based technologies.

The electrical requirements will vary from one building to another and may include a combination of the following components:

The type and use of a building structure influences the type of wiring to use. And the building owner and electrical contractor should consider current and future power requirements when determining the size of conductors, raceways, protective gear and other necessities.

An electrical circuit is the necessary pathway required to provide power to your appliances, gadgets and electronics. Each circuit is a closed loop system that is formed by wires, a power source, load, a switch and some sort of circuit protection. The electricity flows from the power source, into the circuit and ultimately into the object that it is plugged into. After the electricity has provided the necessary power to the device, it then flows back to the original electrical source, allowing the circuit to keep the electrical current flowing in a smooth manner. There are three different types of electrical circuits: the parallel circuit, the series circuit and the series-parallel circuit.

How Do They Work?

An electrician in Santa Monica installs an electrical panel that is then broken into several circuits that provide power to your home. Whenever you plug a device into an electrical outlet, or flip a switch, you are accessing electricity that is flowing through that particular circuit. By plugging in or flipping a switch, you are essentially completing the circuit. This allows power to flow freely from the positive terminal of the power source, through the wire, and back to the negative terminal. This allows us to provide on-demand electricity to our light bulbs, televisions, appliances and other electronics.

Types of Circuits

The simplest type of circuit is the series circuit, because it provides only one possible path for electrical current. If this circuit is broken at any point along this path, none of the devices on the circuit will work. A parallel circuit, on the other hand, contains more than one path for electrical current. If one of the paths is broken, electricity can still flow to other portions of the circuit. A series-parallel circuit combines these two circuit types. Some portions of the circuit are parallel, and some are attached in series. If one of the series circuits breaks, it will shut off power to anything in that circuit. If a parallel circuit breaks, all other parallel circuits will continue to function as normal.

As an electrician Santa Monica, The Electric Connection installs and maintains electrical circuits on a daily basis. For more information, or questions about our services, visit our main website at www.theelectricconnection.com.

How do tripped circuit breakers happen in the first place? An overloaded circuit is the most common reason for a breaker tripping and usually happens when a circuit has more electrical load connected to it than it really should have. Let’s say you have a 15 Amp circuit breaker that is protecting a 15 Amp circuit. If 20 Amps of current start flowing through it because a toaster, TV, radio and space heater were all connected to the same circuit and were on at the same time, then what you’re left with are tripped circuit breakers aimed to prevent overheating of the circuit.

Allow Kolb Electric, one of the premier electricians in Alexandria, Arlington, Fairfax and all of Northern VA, to guide you through the process of resetting tripped circuit breakers, which is actually quite easy.

If your breaker continues to trip immediately after you’ve reset it, this is indicative of a direct short. Do not try to reset your breakers at this point. If these steps don’t help you resolve your tripped circuit breaker problem, it’s time for you to contact a quality electrician in Virginia who can uncover the source of the problem, which could be due to one of the following: