A Look Back At 2011

Texas residents suffered damaging and costly electrical problems in 2011. Three major blackout incidents, two of which happened in the winter months of February and December respectively, left residents without heat and without power for hours and, in some cases, days at a time. Equally distressing was the 71-day drought that had Texans begging their local Dallas electrician for relief, as 100-plus degree heat waves weakened the power grid once again and left residents without air conditioning or electricity.

2012: Not Much Better

Unfortunately, 2012 does not seem to be the year for relief. Experts warn that several factors point to an even more severe blackout and power grid problem in the state of Texas for 2012.

 These factors translate into miserable, costly blackouts and power grid failures throughout North Texas.

Dallas Electrician Company Provides Solutions

There are some solutions for customers looking stay ahead of the game when it comes to protecting their home and appliances from the inconvenient and sometimes dangerous conditions that stem from power grid failures. With the help of a knowledgeable electrician, Dallas residents can acquire an indoor generator, which can serve as an effective emergency power source for your home or business in the event of a blackout.

One of the most convenient features of these indoor generators is that there is no need to use electricity to recharge the battery bank that runs the generator. Without the mess of a fuel-powered engine generator, customers can count on reliable and steady power output and a quiet supply of power for your appliances. Furthermore, the convenience of a solar-power or wind-power battery charge ensures that customers need not worry about using electricity to recharge generator batteries.

Flush or Semi Flush?

Flush mount and semi-flush mount lighting fixtures are integral components in lighting design, adding interest and depth while providing ambient illumination and decorative lighting effects to hallways, bedrooms and bathrooms.

The difference between a flush and semi-flush light fixture is that a flush fixture fits snugly to the ceiling, while a semi-flush fixture is suspended, leaving a small gap between the ceiling and fixture.  Opting for a flush or semi-flush light fixture is based upon taste and proportional considerations, but a few standard rules apply:

♦ Semi-flush—Somewhere in between the chandelier and standard ceiling fixture, the semi-flush fixture shines with distinction.  Taking up just the right amount of space with the power to attract desired attention, the latest semi-flush light fixtures provide superb illumination with artistic excellence.

♦  Semi-flush fixtures provide an added benefit: the small gap allows for double the illumination with indirect uplight rebounding off the ceiling and downlight emitted directly from the fixture.

♦  Flush fixtures—Most often employed in homes with standard 7-foot ceilings to provide general illumination for bedrooms, bathrooms, foyers and hallways.

Novel compositions and unique finishes are available at a variety of price points and are being featured from top lighting vendors around the world, making it easier than ever to find ceiling light fixtures in keeping with your budget and style requirements.

Corbett Lighting offers outstanding flush and semi-flush lighting designs:

-CQ33 “Cirque” Semi- Flush Fixture

-120-33 “Karma” Flushmount Fixture

Electricity may either be connected by 230 or 240 volts (these are called single phase circuits that are installed in most residential applications), or 400 & 415 Volts (3-phase). The latter are typically best-suited to provide power to heavy-duty appliances and equipment and in industrial settings as well as larger commercial applications.

Some people have electric kilns installed in their homes or garages because they indulge in making pottery or ceramics products. Certain homes have very elaborate and large, ducted air-conditioning systems. In all these situations, a 3-phase circuit would be required to support this heavy power usage.

The type of circuit used is dependent in the equipment or appliances installed on your property. It is important that you check the power & voltage requirements of the installations properly, before deciding what type of circuits you need. In most instances, even massive ovens and high energy-consuming heaters are typically singe-phase.

This current in amps has to be multiplied by the voltage to give you the power in watts. If a 3-phase supply is available, the total voltage of 24,000 watts will be divided by 3; this means 8000 watts will be used in each phase. This means the current in each phase is lower than 1/3rd of what it generally is in a single phase power supply (about 30 amps in each phase instead of 100).

The aspect to keep in view here is that if you have a 3-phase electrical connection, you will end up paying higher connection fees for it. In addition, you would have to pay fixed annual charges for 3-phase as well, so you shouldn’t be considering it for your new home unless it’s really needed.

Depending on the locality you live in, your property may also be connected to a SWER electrical line and many country areas have them. The SWER (single wire, earth return) delivers single-phase power. It is a very economical way of power distribution since it requires only a single transmission or active line. The earth is used as the return conductor and there is no neutral line.

In case you need to use any 3-phase motors in these settings, you would have to get a single-phase to 3-phase converter installed. Choosing the right phase is crucial to the optimal working of your equipment and for the safety of your property as well.