We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

Given just how much we depend on electricity nowadays, it’s normal to look for a quick solution for your home electrical repair needs. As fast as doing it yourself might seem, calling in an electrician will always be the best course of action. Everyone wants to save money, but hiring a professional for home electrical repair isn’t an expense you should try to avoid.

Basic knowledge and skills might be enough for various other types of repairs, but when it comes to electrical work, it just isn’t enough. Aside from the obvious dangers involved, you could cause the kind of damage that defeats the purpose of trying to cut costs in the first place.

A licensed electrician can diagnose your problem quickly. Beyond that, an experienced professional will resolve your problem in a way that will ensure it doesn’t come back. Unfortunately, even if you or your friends are good with tools, you can’t make that same promise. Trying to fix the problem yourself can make it worse, and when you finally call an expert in the price tag will be much harder to stomach.

The job could also become much lengthier, along with additional hours of frustration as the electrician corrects your mistakes in addition to the original problem. When it comes to electrical work, it takes only the smallest error to cause a big issue. Even an incorrectly placed wire could cause extensive — and expensive — damages. These issues could endanger your safety and prolong the duration of the repair job.

Experts will also have equipment in their arsenal that allows them to complete the job faster and more effectively than any amateur. As such, trying to save time by attempting repairs yourself is only going to achieve the opposite.

Even if you’re skilled enough to address what appears to be the issue plaguing your electrical system, you might still be doing more harm than good. Sometimes performing a minor repair, even one that seems to resolve the problem, only covers up a much more serious underlying issue. This can lead to a much bigger headache down the line, as the hidden problem will only worsen as you mistakenly believe everything is okay. Long-term issues like these become a time-consuming hassle to get repaired. Not only that, but they can also be extremely expensive if allowed to persist for too long.

You can avoid all that if a professional handles the home electrical repair in the first place. An expert electrician will catch the warning signs, even the subtle ones, and pinpoint the real issues at work. Sometimes, in spite of how you may feel, a quick fix is actually the last thing you need. Getting the problem repaired the right way so it won’t come back is much more important than reaching a speedy resolution.

Also, experienced professionals will not focus only on the home electrical repair that seems necessary. Instead, they assess the full picture when they work, which includes looking into the condition of your entire electrical system. This, apart from allowing for a more thorough and effective repair, can help them identify future problem areas. The earlier a pro spots the issue, the more easily it gets resolved.

Performing your own home electrical repair is an extremely risky move. This isn’t just because of the extra expenses associated with mistakes, or because you’d only make the problem worse. No, the most important reason you shouldn’t try to perform your own electrical repairs is safety!

We’re excited to announce that we now offer

Multi-panel light systems are designed to add a point of interest and liven up a room. They can be used for numerous applications, including dental office lighting, lobby lighting, hospital lighting, classroom lighting, waiting rooms, conference rooms, basements, and more. A choice of stock cloud images can be split into two-, three-, four-, or six-panel displays depending on the chosen panel size. Custom panels can include any image and number of panels, and they can be arranged in any way.

Each Even-Glow® LED panel light uses perimeter-mounted LEDs with an optical diffuser to emit natural white illumination without visible bulbs or hot spots.

Dimmable and non-dimmable panels are available for custom or static levels of light. Dimmable panels consume just 40 watts of power, and non-dimmable 2-by-4-foot and 2-by-2-foot panels consume 50 or 72 watts respectively—significantly less than fluorescent fixtures. The panels have sturdy white or black aluminum alloy frames. They operate within a 100-277V AC range and are designed to last three times longer than fluorescent troffers.