GFCIs or ground fault circuit interrupters are safety devices that have been extremely effective in reducing the total number of home electrocutions by almost 50%, in Australia. Most new homes and businesses now have these devices installed in locations where water is present in and around the premises. It’s important that electrical installations in outdoor locations be protected from wind and rain; that’s the one way to prevent shock hazards.

Before we understand what a GFCI is, let’s understand what a ground fault is. It is the unintentional flow of electrical current between the source and any grounded surface. If the electrical installation isn’t properly protected, an individual that comes into contact with an energised part can suffer an electrical shock.

For instance, if the person is holding any deteriorated electrical cord attached to the hair dryer, and it happens to touch a plumbing fixture they are using, they can get electrocuted and will suffer a painful shock.

This small receptacle has “test” & “retest” buttons on it. It may sometimes be built into circuit breakers that are installed in the main electrical panels. When electricians are conducting an electrical audit, they also test whether the GFCIs are functioning properly. They might also recommend that you get GFCIs installed in the vicinity of plumbing fixtures.

These are extremely useful electrical safety devices which trip the electrical circuits in case they detect any leakage current or ground fault. An individual that’s become the pathway for a leaked current can get a severe shock or will get electrocuted. It is important to get GFCIs installed in any outdoor or indoor areas where you feel that water might come in contact with the electrical installations or fixtures you have on your property.

Ideally, the areas where GFCIs should be installed include:

It is important that these devices be checked with regularity. If you have opted for an electrical maintenance contract, the electricians will ensure that the GFCIs are checked along with all the other installations; this will help confirm they are working as they should and that they provide the necessary safety to those living or working on your premises. You can also test the GFCIs on your property, by following these basic steps:

If you aren’t too sure about whether you have GFCIs installed at the right points on your property, call in your local electrician. They will inspect all the fixtures and inform you if GFCIs have to be installed in any specific rooms or outdoor spaces. Aside from this, they will also audit the rest of the installations and tell you if any upgrades are required.

You are searching for a local electrician.  You Google local electrician but find hundreds of search results.  Rest assured if you are reading this and you live in the Des Moines Iowa metro area and surrounding communities you have found a highly qualified local electrician.  We are central Iowa’s primer local electrician and are ready to help you with your residential or commercial electrical project.  Go with a trusted local electrician.  Go with Custom Electrical Services, we are a local electrician and open 24 hours per day.

When choosing a local electrician there are important things to consider.  You want to make sure you are getting the most qualified and rebuttal local electrician for your project or electrical repair.

We will only send a trusted and local electrician to your home.  Only choose a local electrical contractor that uses independent third party verification of its employees.  We only employ local electricians that receive the technician seal of safety.  Your safety is of the up most important to us!  Call Custom Electrical Services today and have one of our trusted local electricians provide you with the best customer service experience possible.

Go with an local electrical contractor that never closes!

Categories: Local Electrician« Team Member Spotlight  |  Ceiling Fan Winner! »

Choosing the right size depends on the level of energy independence that a renewable energy owner wants. It may simply boil down to what you can afford. These levels range from 100 percent or completely off the grid (the most costly), to a simple energy backup for emergencies.

100% energy independence or completely off the grid: this requires a huge investment in terms of generation and storage. In addition, it may require other power sources such as fossil fuels or wind generators.

High energy independence: This requires a solar system with enough batteries to last a few days or even through the winter. PV systems are sized to enable the owner to have surplus energy to store during summer and be self-sufficient through winter without relying too much on the grid. The customer will still rely on the grid for backup just in case there are prolonged days of bad weather.

Summertime independence: Customer installs just enough panels and storage capacity to get through a normal summer day but will have to draw power from the grid during the winter.

Peak time independence: Battery size should be large enough to supply power during peak times when electricity rates are highest.

Reduced reliance on the grid during peak times: Some customers cannot afford to install enough storage to cover their entire peak time usage. In such a case, some will install a system that will enable them to at least reduce part of their grid usage during these times.

Emergency power backup: This requires smaller energy storage, enough to cover a short power outage. Some customers use this together with fuel generators. Battery storage is only required for the short duration from the time grid power goes out, to when the alternative power becomes available.

Even though a solar energy system is a great investment that reduces your electricity bills, it is not possible to completely get off the grid without investing in large storage systems. However, adding modest battery storage to a grid connected to solar systems is a better way of increasing your independence from the grid without spending too much.

Most marketers have online tools that can help you get the right size battery based on various factors. However, it is advisable to consult professionals for the best advice.

Customers with solar systems are increasingly adding battery storage to reduce their electricity costs or become independent from the grid. With better technology and prices getting lower every day, battery storage is becoming an appealing component to many solar power system owners.

This type of storage allows the customer to charge their batteries during the day and then discharge them when there is no generation. This permits homeowners and businesses to have a backup power source and save on electricity bills. In addition, you can sail through cloudy periods or other times when power generation is low.

The competition is steep and the lighting designs are sensational.  Among the leaders in the race for the most unconventional ceiling light fixture designs of the year, these standouts are exquisitely different and–although they may not fit in with everybody’s interior design scheme–they make for mind-altering artistry that brings the “wow” factor to a select few who are daring enough to shine outside of the box!

TEN:  Attractively AKIMBO

“Akimbo” from Tech Lighting

NINE: Outer bound with ORION

“Orion” from ET2

EIGHT: Unearthing URCHINS

“Urchin” pendant light from Varaluz

SEVEN:  Cultivating CASSINI

“Cassini” from Trend Lighting

SIX: Mixing it up with MIMI

“Mimi” from Maxim Lighting

FIVE: Hoodwinked by HOUDINI

“Houdini” chandelier from Corbett Lighting

FOUR:  Zanny ZIUM

“Zium” from Elán Lighting

THREE: Captivating CATALYST

“Catalyst” from Fine Art Lamps

TWO: Metaphysical MICRO

“Micro” from Eurofase

ONE:  Spellbinding STRANDELIER