There are many reasons and advantages of LED street lights over HPS, Metal Halide, and any other HID light used in the street lighting industry. These advantages of LED street range from cost savings, higher quality of light, and overall better efficiency.

LED is quickly becoming the “go to” light for all uses; residential, commercial, and industrial. From fully replacing and retrofitting LED is seriously becoming the majority within the world of lighting. The following list is going to cover 4 major advantages of LED street lights over HPS and Metal Halide, hopefully it shines some light on the true benefits of LED for even Metal Halide, you get results that show LEDs actually really do pay for themselves. If you use your lights often, making the switch to LED street lights may even pay themselves off within a few years.

If you’d like to see how much you could save, check out the diminishes over time. This is a highly important thing to note because with greater lumen depreciation comes added costs of maintenance.

Lighting fixtures such as HPS and Metal Halide have lumen depreciation that happens much earlier in their life and much quicker throughout the bulbs life. Whereas an LED takes a longer time to start depleting in it’s lumen output and much slower lumen depreciation than HPS and Metal Halide does.

While not all LED suppliers and manufacturers, MyLEDLightinGuide.com offers LED fixtures and retrofit kits that can produce at a very high MyLEDLightingGuide retrofit kits can run as high as 151 lumens per watt. While the typical retrofit kits on the marketplace (on average) run at only around 110 lumens per watt.

This is just a prime example of how powerful lumens per watt can be. The more lumens per watt you get, the less watts you will need to produce the same amount of light.

So, let’s compare the “average” retrofit kits compared to a Metal Halide light. Remember, the “average” retrofit kits run at around 110 lumens per watt. Compare that to a Metal Halide light that runs around (on average) 90 lumens per watt.

So just by these numbers we can start to see the power LED lights have and how they need less watts to produce the same amount of light that a HPS or Metal Halide light does.

In addition to #3 on this list, LEDs also provide a higher quality of light measure by the Color Rendering Index (CRI). Here’s two images that should do the talking:

Street Light Conversion From 400W Metal Halide to 120W LED using a LED Retrofit Kit (before)

As you can see after the 400W Metal Halide was replaced by the 120W LED fixture, the light produced is much brighter and illuminates a greater area. On top of that, it is using way less energy (400W down to 120W)!

Brighter and greater illumination can greatly increase safety and reduce crime by the simple fact of being able to see more throughout the night. Better illumination also creates safer roadways by not leaving any dark spots that may cause issues for drivers during night time driving.

Going green is no longer an inconvenience.  The fuel cost savings alone makes buying an electric vehicle a wise economic decision.  Let alone the environmental benefits.  Now add on the current $7500 federal tax credit on top of what several states offer and you have huge savings!  Not only do we carry the seal of a  Green Screened electrical contractor.  We are also authorized to install Tesla Charging stations.  These charging stations are not a do it yourself installation.  Tesla recommends hiring a licensed electrician and also a authorized Tesla electrician for installation.

Did you know there is a Tesla SUPER CHARGER located at the Hy – Vee on Jordan Creek Pkwy.  Currently its the only one in Central Iowa and 1 of 3 in the State of Iowa.  However plans are underway for additional charging stations.  The united states is covered with Tesla super chargers.  In fact to date Tesla says there is a total of 744 supercharger stations with 4,703 superchargers.  At a super charger location you can charge up to 170 miles in as little as 30 minutes.  Plug your Tesla in and grab a Starbucks or do some grocery shopping!

Before you deck the halls and transform your Florida home into a festival of lights this holiday, consider how your lighting display will affect your winter electric bills. Monthly bills can be especially expensive when you and your neighbors beautifully decorate your homes with holiday ENERGY STAR® qualified LED light strands you will save on your utility bills this holiday. And that’s not their only advantage—Use a timer to automatically turn on your holiday lights at dusk and turn off in the middle of the night. By limiting the amount your lights are on to times when people can appreciate them, you will reduce your energy bills.

There are plenty of ways to decorate your home for the holidays—ways that don’t impact your electric bills! Make use of other decorations like tinsel, wreaths, and jingling bells! Instead of decorating the front of your St. Petersburg home with strands of lights, consider buying a solar powered spotlight with different color filters. There are many ways to enjoy the beauty of the holidays without raising your electric bills exponentially.

There are few things more chilling than a home burglary. Imagine a stranger rifling through and stealing your possessions – to say nothing of the danger if you or your family members are home at the time of the break-in. Fortunately, you can take steps to deter potential thieves by using outdoor lighting to increase the visibility around your home. Today's inexpensive LED and smart technologies mean that you can create a system that is attractive, efficient and responsive without breaking the bank. Protect your home and your family with some of these outdoor lighting ideas.

A Light in the Darkness

Your outdoor lighting system should include lights near any doors and windows where a person could enter the house. "The biggest thing for any person who can burglarize a home is the ability to secrete movements," a Chicago Police Department spokesperson told the Chicago tribune. "This means darkness.”

Many outdoor lighting systems are easy to install on your own, although a few may require the help of an electrician for new wiring. LED bulbs are an attractive option because they use only about a quarter of the energy of incandescent bulbs and last up to 25 times as long. Some outdoor lights come equipped with a built-in security camera that will not only light up to scare off any would-be burglars, but also capture their image so you can notify police of the suspicious activity.

Stand-alone solar panel lights are a good option for walkways, although they shouldn't be relied on as a home security measure since variations in weather mean they might not always provide enough light to deter a prowler.

Getting Smart About Your Lighting

Smart lighting systems let you control your entire home’s lighting setup from your smartphone, even when you're away from the house. You can adjust timers, motion sensors, dimming functions or manually instruct the lights to come on or off. Certain smart lighting and security systems will automatically alert you when someone is at the door and allow you to talk to them through your phone no matter where you are in the world.

With smart technology, you can also add an extra layer of deterrence by having indoor lights come on for a period of time when you are away, giving the appearance that somebody is home. If you already have a lighting system in place, you can upgrade it to a smart system by swapping in some wireless smart switches and installing a control hub.

A Safer and More Attractive Residence

Lighting up your outdoor space is more than just a way to deter burglars. It can also make your yard look more attractive at night and help visitors safely navigate their way to your door.

If you need help planning or installing an outdoor security lighting scheme, contact your local electrician right away.