When electrical systems in your home start to get a bit wonky, it can be hard to determine when giving your local Rockville electrician a call is the best bet. You certainly don’t want to make an unnecessary call, but electricity is nothing to trifle with! Want to know how to make distinction? Follow along to find out when to contact your electrician!

Are you in need of emergency electrical services? Then don’t hesitate—contact Kolb Electric at 877-287-1179 immediately and we’ll get one of our fully stocked vehicles to your home or business!  

We should start by saying that any time you feel threatened or concerned about electrical safety, you should go right ahead and contact our certified electricians. Your safety and feeling of security is of the utmost importance, so it’s better to call and be sure during an electrical emergency.

Having said that, here are some situations when you definitely need professional service:

When you need a Rockville electrician, our certified emergency service professionals can bring you the best care and emergency service in a hurry! If you notice any of the issues we discussed above, be sure to contact us online or call on the phone at 877-287-1179.

With the evolution of energy-efficient LED lighting came an endless source of creative costume ideas. Small, cool & colorful lights now come in portable, battery-operated packages where the only thing stopping you is your imagination! This Halloween season, we’ve rounded up a handful of our favorite costume creations using a variety of light sources.

Mutant Cyborg Halloween Pumpkin

Part robot, part pumpkin, this crafty mutation is all ingenuity.

Glowy Zoey 

When Royce Hutain filmed and published this short clip of his daughter in her new home-made costume, it was an overnight sensation, even generating a call from the Jimmy Kimmel show. Hutain didn’t invent the LED light costume, so why the sudden fame? Maybe it’s the toddler waddle, all lit up in it’s glory. Or maybe it’s the chuckle of the gratified parents trying to keep the camera steady that just makes us crack up. Whatever it is, it’s absolutely brilliant. You can So Sew Easy

Any little girl can feel like a Princess with this delightful little light-up dress by light-up fairy wings! 

Jawa Costume

The poor Jawa, always back burner to the cool Jedi costume with LED Lightsabers, finally gets his turn in the spotlight in an adorable get-up complete with glowing eyes made out of orange LEDs. Make your own with this via via string lights.

Littlest Firefly

If you’re dying to install your new instructions for how to install a light bar. These instructions include options for installations with or without a wire harness and for connecting to existing LED lights. Installation will vary based on the type of vehicle, existing lighting setup, and chosen wiring method, but these instructions can serve to give you a general idea of the process. Light bar mounting instructions are also available and are listed by WH-DTS10, WWH-DTD30; (ATP) WH-ATPD20, sdoptional mounting brackets; be sure not to overtighten the hardware (you will need to adjust it in step 7).

3. Route the lighting side of the wiring harness from the battery to the light in a safe, secure manner. Connect the harness to the light. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wiring harness is a safe path to follow. Some lights may not have DT or ATP connections on them, but the connectors can be added from the harness kit or purchased separately (ATP-FPT).

4. Continue to route the switch portion of the harness to the desired location of the switch. The switch may need to be unplugged from the harness to make routing of the harness easier. An optional remote-controlled switch (RS-x) are also available with different legends.

5. Connect the black (ground) wire with the large ring terminal from the harness to the negative battery terminal. Connect the red (power) wire with the large ring terminal from the harness to the positive battery terminal.

6. Secure the relay to a suitable location, and test the light to make sure the circuit works.

7. Finally, aim the light in the desired direction, and tighten all mounting hardware.

3. Connect the black ground wire of the new light to the ground wire of the old light with solder and heat shrink tubing (PSC-x). Connect the red power wire of the new light to the power wire of the old light.

4. If the new LED work light or off-road light bar has an ATP or DT connector that you wish to utilize, corresponding ATP (DT-MPT) pigtails are available.

5. Finally, aim the lights in the proper direction, and tighten all mounting hardware.

1. Find a suitable mounting location that will allow for running wires and mounting the LED light bar. Mark where your holes will be for the light bar brackets or mounting feet. Check behind drilling locations to ensure nothing will be damaged. Drill appropriate-sized holes.

2. Mount the lights with the provided hardware or with DT-MPT or RRS-SP, RRS-SPx, or RCS-RF25A) under your hood to speed up install time and avoid routing wires through your vehicle’s firewall. Route another run of red wire from the pigtail adapter (connected to the light) to the output terminal of the switch. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wire harness is a safe path to follow.

4. Be sure to double-check for all obstructions and proper clearance. Drill an appropriate sized hole for the switch, and mount it.

5. Connect your black wire to the negative battery terminal. Connect your red wire to the switch input terminal and to the positive battery terminal with an appropriate-sized fuse holder (MAF-x) installed within 18 inches of the battery. You will have to cut your section of red wire to allow for the fuse holder to be installed between the switch and battery. Connect your other run of red wire to the switch output terminal.

6. Finally, aim the lights in the proper direction and tighten all mounting hardware.