Christmas is upon us again and more than any other time of year, it’s the time of year where people put strain on their electrical system.  The lights on your house and the beautiful decorations you’ve been storing in your attic finally are brought out and plugged in for your friends and neighbors to view and appreciate.  And, of course, the vast majority of homes you visit have at least one Christmas tree.  Since most of these things are electrical, it’s probably not a surprise to you that, as a top Dallas electrician, I start getting a lot of calls this time of year.  Though it’s always nice to have the business with Christmas so close, I thought it’d be great to share with ways to avoid wiring problems with your Christmas decorations this year:

 In general, there are a few important tips that can help you avoid wiring problems.  If your lights look frayed or dangerous, they should always be replaced or repaired before using them, frayed wiring are hazardous.  You should take care that your electrical source is safe before you even begin the installation process.  To avoid the potential for overloads, you should have dedicated circuits installed for your holiday decorations.

Most importantly, you should never try to supply power for your lights without contacting a top Dallas electrician to help you install the necessary equipment and make the necessary safety precautions.  Short cuts are potentially dangerous. I can remember one example where a customer had supplied power to their lights by splicing an extension cord directly into their circuit breaker box!  Even worse, they’d shut the breaker box door, pinching the cabling!  Left unchecked, even if this hadn’t started a fire, damage from a power surge or overload could have easily destroyed their whole breaker, meaning they’d have to spend thousands to repair the damage at the absolute worst time of year!

The changing seasons, like the changing characteristics of matter, present dichotomies and the challenge in life is learning to find a successful balance.  Cultivating the right lighting design is all about a successful balance. Our outdoor lighting how-to guide will help you to establish and maintain a splendid outdoor oasis to be enjoyed year-round.

Capitol Lighting Respects the Night with Champion Illumination

The trend toward outdoor living continues with expanding decks and patios and customizing outdoor kitchens for outdoor entertainment.  Also, fireplaces, fire pits, and space heaters are being added to extend outdoor living well beyond the spring and summer months.  To make these areas as comfortable, safe, and maintenance-free as possible, great lighting is key.

Capitol Lighting’s Expert Advice for Lighting Up Outdoors

The conditions are perfect for outdoor lighting installations. Learn how-to customize the perfect outdoor lighting design and : Follow along with our

1.  Consider the areas to be illuminated:

•General lighting for decks, porches and patios.

•Accent lighting for gardens, fountains, statues and unique architectural elements.

•Security lighting for walkways and driveways.

•Decorative lighting for home entry zones.

2.  Choose your power supply and be sure that all outdoor and landscape lighting fixtures are compatible with the system.

3.  Choose landscape lighting fixtures more for their lighting effects rather than their aesthetic appeal.  The decorative features of landscape lights should be secondary to the objects they illuminate. With a good lighting design, landscape fixtures will provide understated elegance to the outdoor environment during the day, as well as at night.

4.  Decide which system works best for you:  Low voltage lighting provides softer more luxurious illumination, while LED is extremely energy-efficient, low-maintenance and most durable.  Incandescent bulbs typically last 1,000-2,000 hours; fluorescent bulbs may last 10,000-15,000 hours; and, LED bulbs may last 35,000-50,000 hours.

5.  Make sure to power your lighting with the appropriate transformers and wiring. If you are thinking about adding to your outside lighting system, choose power sources that will accommodate the additional fixtures.

6.  Automated timers and motion- or heat-sensitive controls make your home appear occupied during the night and save on energy costs. Locate timers and controls in areas where they are easily accessible.

7.  All outside lighting fixtures and accessories must be selected to withstand the elements, including sun, humidity, rain, ice and snow.  Check that all items are waterproof and UL-approved for outdoor use. Copper, brass and composite fixtures are excellent for homes near the seashore where salty air may be a factor.

8.  Think about landscape lighting as part of your planning and construction in a new home environment.  Outdoor lighting designers should coordinate with landscape architects and electricians.

9.  Traditional wall lights such as wall lanterns bracketing main entryway doors help you to identify visitors and ensure their safety.  They are also appropriate for rear and side entrances and over garage doors. Be sure to select post lanterns and wall brackets that are proportional to your home.  When in doubt, size up.  Fixtures appear smaller from curbside viewing than most people would imagine. * *

10.  Take care to avoid glare and pointing fixtures into your neighbor’s property. Curb “light pollution” with shielded fixtures that focus illumination downward.  Most outdoor fixtures may be easily focused to light the environment for safety, security and aesthetics while protecting other areas from unwanted glare and profuse light. * * *

**Rule of thumb for sizing outdoor wall lanterns:  The height of the lantern should be based on the height of the door.  If brackets are to be installed on either side of the door, they should measure about one-fourth the height of the door.  If using only one lantern, size up to about one-third the height of the door.

***“Dark Sky” Compliancy and light pollution:  A man-made culprit, due mainly to poor lighting design, is a phenomenon called “light pollution.”  Light pollution is any adverse effect of artificial light, including sky glow, glare, light trespass, light clutter, decreased visibility at night, and energy waste.  Many of Capitol Lighting’s trusted manufacturers offer “Dark Sky” versions of their outdoor lighting products, which “collar” the light bulb around its base to block superfluous upward emissions of light.

Capitol Lighting’s professional lighting consultants will help you in selecting everything from timers and outdoor hanging pendants to path lights and post lanterns.  Work with the experts to devise fabulous landscape lighting designs and prepare your outdoor environment with quality security lighting customized to enhance the beauty of your home.

Who wouldn’t love to live with a little less clutter? There’s a reason Pinterest is overflowing with images of perfectly categorized & organized cupboards, closets, pantries, drawers, desks, garages, kitchens … the list goes on! via artisticdesignsforliving.com

Track lighting has become incredibly popular for residential settings in the past couple of years. After installation, the light fixtures can be moved along the track easily, making them perfect for storage spaces where your lighting needs may change over time. Their spotlighting effect adds a touch of drama.

2. Multi-Functional Closet Rods (Built-in LEDs!)

3. Illumination Without the Fixture

4. Glamor in an Unexpected Place

With spring upon us and summer just around the corner, you are probably itching to get the pool uncovered so you can host the first pool party of the season. Before you do that, you may want to consider upgrading, adding or replacing your existing pool lights. Pool lights add a certain quality to a pool while providing a layer of safety. However, there are several lights to choose from and you need to know which lights are best for your needs. An electrician in Beverly Hills has some tips for you to use when choosing your pool lights. If you have any other questions, you can call The Electric Connection.

There are two main options available for your pool lighting needs; in-ground and above ground. The above ground option is the cheapest. The in-ground tends to be a favorite simply because it provides a more uniform look.

Above Ground Options

Floating pool lights are inexpensive and do not require a Beverly Hills electrician to install. Simply pop the lights in the pool and it is done. The lights are festive, but they can interfere with swimming. You will also not have the benefit of the lights being stationary. It seems they tend to congregate and float to one area of the pool. For soft-sided pools, there are magnetic lights that stick to the side. These are again very easy to install and reliable. In Ground Options

LED bulbs are extremely bright and will last for around 10,000 hours. The lights are sealed in a waterproof housing. You can expect the bulbs to last anywhere from 10 to 15 years depending on how often the lights are used. Fiber optic lights are another option. However, they do tend to be much more expensive and the bulbs do not last nearly as long. In either case, you would need the pool lights installed by an electrician. Beverly Hills homeowners need to hire a professional to ensure the lights are installed safely and do not pose an electrical hazard. Give The Electric Connection a call today to schedule your pool light installation.

Right this instant you are probably enjoying light provided by a CFL or an incandescent bulb. Buying and installing this kind of light sources is an automatic process. It`s popular, you buy it and when it does not work anymore you just go to the store and replace it. Little do people know about the hidden dangers of these light sources and their utter inefficiency, not to mention the way they damage the environment.

Let`s take each one and see why they are not the best option.

Incandescent bulbs have been around for a long time, being quite simple and cheap. While in the past they may have been revolutionary, today they are ineffective and their production will soon be stopped. Incandescent bulbs have several disadvantages and can`t even compare to, for example, LED lighting:

Sure, manufacturers strive to create better variations but they are all costly and do not improve the initial concept by a whole lot.

CFL are much better than incandescent bulbs and replaced the latter in many places but they are still not quite the best option, even if they can last up to 12000 hours (no match to LEDs, which go up to 200000 hours). What are the problems?

A deep and attentive analysis like this one reveals just how many things we are used to ignore. Fortunately, a better alternative makes both CFL and incandescent bulbs seem utterly irrelevant. The alternative is LED lighting, a known technology that is now applied to public and private lighting. It is ten times more efficient and it is not a threat to the environment or to you.