For the photo shown to the right, taken at night in a Texas ghost town, Danser assembled the following items: a powerful, handheld LED light; his Canon 5D Mark iii camera and Canon 16-35 mm L lens (at 16mm); Canon 580ex 2 flash; a red gel (piece of red cellophane to color the light of the flash); a tripod; and his girlfriend’s finger (to graciously hold down the shutter release button because he forgot his bulb release at home!).

Danser told Pegasus: “So, I set my camera on bulb mode and had my girlfriend hold down the shutter release button for 13 minutes, while the camera was very sturdy on the tripod. The place was pitch black except for the stars and the moon (very little ambient light pollution in the desert). As my girlfriend was keeping the shutter open, I walked to one side of the structure and methodically shined my flashlight (rated at 2000 lumens, so it’s pretty bright) all along the exterior and front facade of the building. This lasted for about five minutes before I turned the flashlight off and ran to the other side of the building and ‘painted’ for another five minutes.”

Danser said that one of the important tricks of light painting is to show off the textures of the buildings by shining his LED flashlight at an angle instead of from the camera position.

After “painting” the sides of the building for five minutes each, he ran inside and popped off about 10 red-gelled flashes to create the effect of a warm glow pouring out of the building.

When asked how he was able to run in and out of the building without showing up in the photo, Danser simply replied that “The camera could not ‘see’ me because I was moving quickly, and there wasn’t enough ambient light to expose me in the picture.” While popping off the gelled flashes in the building, he always made sure he was not visible to the camera.

After 13 minutes at an aperture of 2.8, Danser was able to get an excellent exposure of the night sky while having ample time to do all of the “light painting” that he had planned beforehand.

Soon I hope to try some light painting of my own with less expensive equipment to show you how anyone can adopt Danser’s technique. After all, light can be used in all kinds of art and photography projects.

In the meantime, check out this Danser’s website to see tons of beautiful experiments playing with—and painting with—light. Thanks, Matt!

It’s 2013, and if you’re still spending a ton on your energy bill, you should know that it doesn’t have to be that way. Right now, about 20% of the energy we consume goes to lighting. But, with a few energy-efficient changes, we can see that number (and the numbers on our monthly bills) dwindle. This post is the first in a series on how to make the lighting in your home or business more energy-efficient. 

Everyone’s got to eat, and for many of us, the kitchen is the very heart of the home. The kitchen also requires excellent lighting for cooking and cleaning up. So, I figure it will be a good place to start an energy-efficient lighting makeover.

By Clarissa Allison | August 26th, 2016

If you or a loved one have ever had to room in a dorm, you’ll know the lighting in them is typically abysmal. We know that lighting plays a major role in our circadian rhythms and emotions as well as our ability to concentrate and complete tasks. These factors are of utmost importance during the hectic college years. Read on for some helpful tips on compact and functional lighting options for the alumni in your family!

STRING LIGHTS

There are always things that need to get done around the house. Some of those jobs tend to be more obvious than others. Things like repainting the walls, fixing the brick pathway or oiling squeaky door hinges tend to be more obvious. However, there are some little things that deserve our attention as well. Little things that are silent, but ignored or used improperly, they can become extremely dangerous. We are referring to the electrical outlets in the home. Little, insignificant and rarely focused on outlets pose a threat explains your Pasadena electrician. The team at The Electric Connection wants you to know you can help make your home a little safer by giving those outlets some well-deserved attention.

There are too many homes that do not have the GFCI outlets in the kitchen and bathroom areas. These outlets have been designed to trip the breaker within a split second of the circuit being interrupted. This one little feature can save lives by preventing electric shock. If you are not sure what the outlets are or whether you already have them or not, a quick visual will tell you the story explains an electrician in Pasadena. A GFCI outlet will have 2 small buttons in the center of the outlet between the top and bottom plug-ins. If the circuit is interrupted, you will want to unplug whatever device triggered the trip and push the reset button.

This one small feature is an important safety feature, especially when water is nearby, like the kitchen or bath areas. It is an inexpensive, quick upgrade that could save lives, prevent minor shocks and electrical shortages that could result in a fire. If you are ready to make this minor change, call your electrician. Pasadena homeowners will appreciate the additional safety precaution. Give The Electric Connection a call today and schedule your GFCI installation.