Why do electricians and electric companies insist on using copper wiring above all else? It turns out that copper wiring is the best material for the job, based on its various properties. For example, copper is extremely malleable and ductile; in addition, it also comes with very excellent electrical and heat conductivity. It can be considered virtually perfect for wiring because it is rustproof and robust. Since it has these properties, copper wiring is able to carry an electric current over a much longer distance than other sorts of wires. While copper has a number of uses—it is used from everything as a constituent of different metal alloys to a construction material—its most popular use is in the electrical industry and for creating wires.

There are many handymen all over the world, and while we salute them, we have to remind everyone that there are licensed professionals in place for a reason. Your brother-in-law might be able to get the quick odds and ends completed, but if the job is not being done right or a larger problem surfaces, take care of it correctly or you could be paying more than you expected to save.

Licensed electricians are licensed because they have gone through the training and testing necessary to do the job safely and correctly. After years of training on the job and in the classroom, licensed electricians are required to complete an exam that tests their full understating. This process allows electricians to enter the field with the right knowledge and experience under their belts.

As a licensed electrician, we can obtain permits on your behalf. Some work requires you to apply for a permit from the city. If you do work that is not permitted you can be slapped with a fine you didn’t budget for. An Expert Electrician will help to identify the required permits and avoid costly fines.

Part of all the training that licensed electricians go through is to sharpen their sense of safety and make them aware of any dangers on site. When our electricians begin their work they will identify any hazards that could harm the home and its occupants. This means when a job is done, all safety issues will be addressed and you can have peace of mind about the work completed.

When you hire a licensed electrician you can be sure they understand all the safety codes and building codes. Any work performed will be done up to code so it does not need to be redone in the future.

So while we respect all those handy people out there that like to get the job done themselves, we want to encourage you to use the experts when the occasion calls for it. Don’t let your home end up on a disaster DIY show.

The home electrical system consists of various components that enable the safe delivery of energy to different sections and appliances in the household. Even though the system may appear complex, it is important for the homeowner to understand a few basics.

This would help you when things do not work or there is an emergency that requires turning off circuits or the entire installation. In addition, an understanding of the home electrical system will help the owner respond to questions from prospective buyers.

All the electrical circuits in the house originate from the main breaker panel. The panel is usually inside the house and near to the power entry point. However, the panel can also be far, and especially when in a multi-family structure.

The rating of the panel determines the number of circuits and power that the home electrical system can support. Some older homes have been using the 100 Amp service, smaller installations use a 60 Amp service while newer and larger houses are built with 200 amps to accommodate the increased number of electrical and electronic equipment commonly used in a modern household.

Different loads require the correct size of cables and breakers that can handle the current without heating up. For example, an air conditioner requires a 30 amp circuit while a kitchen may use two 20 amp circuits.

If there is a fault, such as a short circuit or overload, the breaker trips and cuts off the power to the affected circuit, hence preventing further damage that could lead to fire. Before resetting the breaker, you should first ask an electrician to check and rectify the problem.

A home electrical system consists of different individual circuits originating from the main breaker panel. The wires from the panel run to the rooms to supply the outlets, lights, and hand wired appliances. In most cases, several rooms may share the same circuits such that all the lights in the house are on one breaker, outlets on another breaker, etc.

Some dedicated circuits from the main breaker may go directly to the hard-wired appliances and nowhere else. Equipment such as the electric water heaters, furnaces, and air conditioners are usually installed on their own. Other hard-wired devices include the smoke alarms, which may also have battery backups so they will work even when there is a power outage or a fire interrupts the home electrical system.

Grounding is an essential protective feature that must be installed in all home electrical systems. It provides a path for the electrical current arising from faults that make the exposed metallic parts to become live and dangerous.

The ground connects all the exposed metallic parts to the earth mass through a third wire in the power cord to the equipment. This provides a low electrical resistance path for the current, hence, making the parts safe to the touch even in the event of a malfunction.

maintenance and repairs.