One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.

As I’ve said before, I’ve spent years in the electrical business working hard to help people save money and keep safe.  But I’m not really any different from any other American.  At the end of the day, I get to lay down my work for a while and come home to my wife and children, and I want nothing more in all the world than for them to be happy and safe.  For me, that’s one of the places where being a parent and being a Top Garland electrician can come together.  I have the expertise from my trade to do what any parent would want to do; make your home safer for your family.  Which makes this story I’m about to share with you hit me even harder than it would otherwise.  I can’t think of anything worse than something like this befalling the people I love.

Not so long ago, a mother in Texas was bathing her five and six year-old children when disaster struck.  A hair dryer, plugged into an outlet nearby, was accidentally pulled off a nearby counter, and wound up falling into the bathtub.  The current from the hair dryer quickly passed into the bathwater.  Neither child survived.

What makes the story even more tragic is that the deaths of these children could have been prevented with an investment of less than sixty dollars in equipment and labor costs.   Specifically, installing a GFCI or Ground Fault Circuit Interrupter, could have saved the lives of these children. The home the family lived in was an older home, and as a result the circuit in the bathroom wasn’t equipped with this simple yet incredibly important piece of equipment.

A GFCI is designed to quickly interrupt the flow of electric current when it detects that the current is imbalanced, which is a sign that current’s passing through something other than what it’s supposed to, like a person.  This can be a danger when we’re dealing with outlets close to water; the composition and chemical structure of water make it an extremely effective conductor of electric current.  It doesn’t take very much water, either; unplugging an appliance with your hand in a small amount of spilled water on a counter top can cause you to suddenly complete a circuit to the ground, giving you a very nasty shock.

As you might expect, this means that a GFCI should (and by code, must) be installed anywhere there’s a electric device close to water. This isn’t limited to kitchens and bathrooms either; GFCIs should also be installed on outlets located in garages, near any counter top, near pools and hot tubs, and on any external outlets.

We don’t always think of external outlets as needing a GFCI, but they do; remember, any electronic equipment you use outside interacts with the elements.  Using an electric lawn care device, like a weed whacker or electric mower on wet grass can be dangerous, especially if you happen to run over the cord, which could create a circuit between the electricity and the ground through your body.

One of the most common issues I see where GFCIs are lacking, and could be potentially dangerous, lie where there is plenty of water:  your swimming pool.   Older pools, like older homes, may not have a GFCI installed on the pool light located under the surface.  Over time, the seal that keeps water out of the pool light can break down; if and when they do, it can turn your pool from a fun place to spend time to a place to get to get your goose cooked in the blink of an eye.

Although all outlets like the ones listed above must be equipped with GFCIs according to code, this hasn’t always been the case.  Older homes, like the one where those two children were killed, may have been built before these regulations were put in place.  If you have any question whatsoever I strongly recommend that you contact a Top Garland electrician as soon as possible to perform an inspection.

Spring weather is finally here, a welcome relief for those parts of the country that have spent the last few months plagued by snow and ice. With the warm weather comes an increased dependence on air conditioners, which can use up a large amount of energy and add to your utility bills each month. There are certain steps you can take to reduce the overall electrical consumption of your house so you do not have to pay as much when you write out that check.

Here are a few ways you can improve your home's power use:

LEDs are the longest lasting lighting technology available today. They contain no harmful gasses and are safer for the environment than incandescent bulbs. But if there’s one fact about LEDs that’s considered the most, it’s that they’re extremely energy efficient and are designed to save money! We wanted to show you the results of switching from incandescent bulbs to LEDs, so we developed an LED 

Among other helpful pieces of information, the calculator lists savings per month, savings per year, savings on incandescent bulb replacements, and a break-even point that tells you how long it will take to notice those savings. Here is an example of calculated savings for replacing 10 incandescent bulbs with LED bulbs: