Here’s a familiar household scenario. You put a can of catfood into the electric can opener hoping to see the can spin around and make whirring noises, but instead nothing happens. No spinning, no noise. What to do?

Is the can opener broken or is it just not getting electricity? Finding this out is the first step of troubleshooting the problem.

Step 1: Plug the can opener into a socket that is delivering power to an appliance or lamp that works. Let’s say the can now spins and whirs. You know the can opener is fine. After you’ve fed Kitty, you can turn to the electrical issue to see if it’s something that you can handle or if you need to call an electrician.

Step 2: Look at the kitchen outlet that you originally plugged into. Does it have two little buttons on it that say “Test” and “Re-set”? If so, it’s a safety outlet (GFI) for kitchens and other places where water might be nearby. Push the re-set button and see if the can opener works now. If so, the problem may be solved.

However, if you frequently have to push re-set to get this outlet to work, there’s an electrical problem that an electrician should handle. If re-set doesn’t fix it, go on to Step 3.

Step 3: Is the outlet controlled by a wall switch? If so, flip the wall switch. Does the can opener work now? If not, go on to Step 4.

Step 4: Has the circuit breaker that controls the outlet flipped off? As a first step, turn off any computers and other electronic devices that might lose data if they lose power suddenly. Next, look in the circuit breaker box for any flipped switches. Even if you don’t see one, it’s possible that one has flipped off internally without moving to the off position. Firmly flip off each circuit breaker in turn and flip it on again. Now, plug the can opener into the kitchen outlet and see if it works. If the can opener works, you’re done.

But as a note, if a particular circuit breaker repeatedly flips off, your electrical system may need to be enlarged to meet your power needs or there may be an intermittent short circuit. An electrician can tell you which it is. A short circuit is a fire hazard and should be addressed as soon as possible.

Step 5: If after these steps, the kitchen outlet still doesn’t work, it’s time to call an electrician.

If you follow these steps whenever an electric outlet or wall switch is giving you trouble, you can save on unnecessary electrical service calls.  But if it turns out that you need an electrician and you’re in L.A., give us a call at (800) 990-9490.  We’ll be happy to discuss any electrical issues with you.

Kim Hopkins

CEO, The Electric Connection

Click here to visit our website.

Do you think much about the electric outlets in your home? Odds are, probably not. But did you know that outdated outlets can lead to serious electrical problems, even including property loss and personal harm? The certified master electricians at Kolb Electric come to you today, bringing the things you need to know about the electric outlets in your home!

It’s important to understand that while you may not be seeing it, there are tons of things going on in your walls at all times. And beyond that, technology is always growing (at an alarming rate, in fact!), demanding more and more from your home in the way of electricity, compatibility and staying up to date. Older outlets can create a lot of potential harm, including:

An outlet upgrade project may seem like an inconvenience, but really it’s no trouble at all for a practiced electrician. The process is simple, takes little time, and prevents possible problems (it may even fix a few problems you didn’t know you had!). When it comes to upgrading, there are a few options you might consider, depending on your needs. Consider:

Thinking it might be time for an outlet upgrade? We think so too! Contact Kolb today for a professional solution for all of your electrical needs. Our certified electricians boast some of the greatest skill and expertise in the industry, and we would be proud to handle your outlet project!

If you live in the United States, you’re likely well-familiar with our typical wall-socket setup. Your plug has two flat pieces of metal roughly half of an inch wide, with one side sometimes being slightly wider than the other. Your wall socket has two slots that match this, with one side also being slightly larger than the other. However, sometimes there’s a variance: some plugs have a third prong below and between the normal two, and most electrical sockets also have a third hole to match this plug. What’s the difference between these two types of plugs and is one better than the other?

To put it simply, yes, one is better than the other. When it comes to electrical plugs, the old adage “less is more” does not apply—the three-prong plug is far better than a two-prong. To learn why, let’s discuss the difference between the two.

In order for electricity to flow, you must complete a circuit. A circuit essentially is a connection from your power source to the device, and then from the device back to the power source. The line that brings power from the power source to the device is called your “hot wire”, which is most often red and comes off the positive terminal (noted by the large “+” sign). The line that then returns from the device to the terminal, usually a black wire connected to a “-“ sign, is known as the “neutral wire.” A plug must have both of these lines in order to work.

However, the third prong in a three-prong plug is a “ground” plug, which dramatically improves safety. When an unexpected burst of electricity happens, such a short in the device or a surge from your power supply, the ground plug will take that abundance of additional electricity and move it away from the device and down into the ground where it is safe. This prevents your device from being overloaded which can cause overheating, sparking, and fires in addition to ruining it.

Three-prong plugs didn’t become the standard in homes in North America until the late 1960s. If you have a home that was constructed around this time or after, odds are your wall sockets are probably already of the three-prong variety. Two-prong plugs can work with three-prong sockets just fine, and you’ll rarely experience any issues.

However, if you have any old two-prong plugs, you’ll likely need your electrical system updated in order to upgrade to a three-prong setup. Properly installing ground wires can involve several hours of electrical work and even cutting into your walls in order to do so properly, so it’s a rather large undertaking. However, it’s by far the safest and most prudent option.

Another option that doesn’t involve tearing open your walls is to install a ground fault circuit interrupter outlet, otherwise known as a GFCI. These sockets are two-pronged, but feature a miniature circuit breaker that measures the resistance through a plug and mechanically shuts off when the risk of a shock is present. While this can help you avoid being shocked by a faulty device, there is still no ground wire present so your electronics are not protected from a power surge.

You aren’t blinking without realizing it; you aren’t sleepy or imagining things. Your eyes aren’t tricking you—your lights are flickering. There are a few different reasons the lights in your home might be flickering, so read on to figure out what your problem is, as well as whether it’s a simple fix, or cause to contact a professional here at Hoffman Electrical!

Our team has been providing top-class electrical services to Tampa and the surrounding areas for nearly three decades. Our team has the skill and experience needed to suss out your flickering light problems, guaranteed.

Anyone who has a security system installed on their premises knows exactly how much of research they have conducted before deciding which one to opt for. If you check what’s available in the market, you will find there really is an expansive range of security solutions to choose from, in varying price ranges. In many ways, this wide choice makes the decision more difficult. It’s probably why many people settle for devices that have the most advanced technology.

Unfortunately, that isn’t the end of the story! It doesn’t take too long for security technology to become outdated and get nudged out of the picture by newer, state-of-the-art, security systems. But you can’t really switch to the new technology that easily, even if you want to. After all, the security system you get installed represents a significant investment and you want to be able to use it for as long as you are able to.

If you are considering getting a security system for the first time, or are upgrading to a new one, there are certain things you should keep in view:

While all these factors are important, it’s also extremely important to ensure that the wiring in your home is completely synched to your security needs in the future. Technologies are always in evolve-mode. It’s difficult enough to accommodate the varied equipment that is an integral part of most households. But when you throw in security system-related wiring requirements, you might just be in for some unpleasant surprises, if you don’t keep your future needs in view.

When you are adding a new security system and upgrading your wiring, think about all the places you would want Ethernet, cable, Internet or any other wiring installations and how those needs may change in the future. The wiring you get done now, should keep these things in view. This will help make your security system more future proof than it already is.

For more security system wiring ideas and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263