solar lights to our online store, and there are a handful that I’ve been ogling since the day they took residence on our site. In a strictly professional quest to gain a better understanding of our product offerings (wink, wink) I requested some products for thorough evaluation. The first item to take the spotlight: The Solar LED White Washed Metal Lantern:

The Nitty Gritty:

This lantern would be an attractive addition to just about any style or decor. Use it with a beachy/coastal home or a rustic mountain cabin. I probably wouldn’t choose it as a decoration for an ultra-modern home, as it has a very vintage look.

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

We’ve all heard it before—the incessant “beep beep beeping” of the smoke detector. It’s even more frustrating when you’re not even cooking something! While there are a few easy fixes for this, we often get asked if there’s a way to stop the smoke detector from beeping except for when it’s actually warning you about something. Let the electrical experts at Kolb help.

If you need smoke detector maintenance or assistance, contact Kolb Electric in DC, MD, or VA today.

The first thing you can do is to determine what type of beeps your smoke detector is making. If you’re like most people, you hear the smoke detector beeping and begin to panic, wondering where the smoke is coming from; however, if there is no smoke, and you hear a “chirping” sound, there could be an electrical problem with your detector or if the electricity goes out, a back-up battery may signal its presence.

If you haven’t replaced your battery annually, beeping every few minutes or so means that the battery is dying and needs to be replaced. Remember that rechargeable batteries don’t work nearly as well as traditional ones. A good rule of thumb is to change the battery either during the New Year or Daylight Saving Time, if applicable.

Smoke detectors usually come with a warranty. Some last five years, while others may last longer. There are a few things to look out for as far as smoke detector replacement is concerned. If it works on and off, chirps intermittently, or just plain quits working, it’s time to replace it. Also, if you’re moving into a new home but the home itself isn’t new, replace the unit, since you have no idea how old the detector may be.

Overall, if your smoke detector is beeping, it’s requiring your attention. Just be sure to stick to replacing batteries. If you need to replace your smoke detector, contact Kolb Electric today!

As a facility manager or building owner, it is nearly impossible to know everything about everything in your building. But it is vital to know something about everything, and that goes for your facilities lighting system too. Whether you manage a warehouse, factory, or other industrial sized building or space, the lighting is a huge factor of many things including safety, productivity, and consistency in the work in your facility.

So while you don’t need to know every facility managers and building owners should know about there lighting system and how lighting can make all the difference in various amounts of ways.

1. Not all lights are created equal. This is an obvious one, not all lighting technologies are created the same and all output at different levels. Firstly you have lighting technologies that are less efficient than others. Such as metal halide and HPS which are 2-3 times less efficient than LED technology is. Then you also have efficiency based on a “product to product” basis. For example; while LED is the clear winner in efficiency over metal halide (and really any other lighting technology), one LED product from one company isn’t going to be the same as the next company’s LED product. This is where you really need to dig deep and find the company that offers the most efficient lighting products over all other companies.

Key takeaway? First, understand that LED is the most efficient in a general sense, but also understand that each company and product varies on its own personal efficiency and you should always do your homework before going with one LED product over another!

2. New lighting system upgrade costs can be reduced with rebates. This is only a true statement when you are buying commercially qualified lighting products that are DesignLights Consortium qualified. return on investment overtime by decreased energy costs associated with running your lights. Obviously this ROI period will vary depending on how long you run your lights per day on average, but especially in big facilities they almost always are used often and thus, provide a good and even quick payback period.

4. Create safer environments with a proper lighting system. With low quality light output, you create an unsafe environment that can cause various issues. Lighting fixtures that aren’t outputting the proper amount of light after a few years into there life is all caused reasoning to retrofit over fully replace.