Are you thinking that it might be a good time to install solar panels for your home? More correctly, there has never been a better time to invest in solar panels. Why is it such a good time to install solar panels?

For starters, there are incredible federal tax rebates currently in place that allow you to detect a portion of the expense of installing the panels from your taxes. About a third of that cost, no matter the cost, can be subtracted from your taxes.

The California Solar Initiative was put in place a few years back to encourage residents to take advantage of one of our most abundant resources: sunshine. Now, you may be eligible for a variety of monetary incentives to install a home solar array. The policies are extremely varied across the state, and many of them have expired. Some areas still have potential for Solar Incentives, so acting now could save you additional money.

There is already a favorable picture of the solar installation scene right now, but it gets even better when you consider solar leasing. Solar leasing isn’t the right choice for everybody, but it has tremendous allure, too. Basically, solar leasing is a partnership between you and a solar installation contractor. They install the system and you pay back the cost of the materials over time. Even as they pay down their solar lease, many residents enjoy savings on their power bills, too. You might even be eligible for free installation, making the proposition an investment of zero dollars for a lifetime of savings.

If you’re interested in the potential of solar panels and solar leasing, call us to discuss your options. We can get you started with a quote over the phone today and soon have a solar array up at your house. It’s never too late to start saving, so start today!

To Tampa residents, power outages are nothing new. We’ve dealt with all kinds of crazy storms and annoying weather in our time here, and it can be quite flustering if you’re not sure how to handle things. But if you’re prepared and know what to do, an outage can become little more than brief annoyance. Find out what to do during an outage with the help of the experts at Hoffman Electrical!

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Electric vehicles are one of the hottest new trends in the automotive industry. The idea is very appealing—According to ChargePoint, EV drivers save over 2.4 million gallons of gas annually and this will most likely only grow as popularity continues to increase. Going green is a very admirable goal. If you have considered the idea of an electric vehicle, one of the most common Los Angeles electrical questions you may have is how you go about keeping your car charged when you are on the go in day –to-day life. Utilizing your home’s electricity properly as well as visiting charging stations, such as those by ChargePoint will keep your EV going strong.

When it comes to charging at home, it is important to save money when at all possible while charging. You may want to contact an electrician in Los Angeles, from The Electric Connection, to see if your plug-ins, wiring and other equipment is up to par and will properly charge your electric vehicle. Then, it is important that you check with your electric company and see if there are any ways to save money by charging at certain off-peak hours. You may find that by changing your electric plan, you can save a significant sum on your electricity bill.

Charging on the go is becoming easier as more electric vehicle chargers are now available. For instance, in New York, there are currently 800 charging stations, and plans are to grow this to 3,000 over the next five years.

There are so many benefits to choosing an EV. In California, you may be able to drive in the HOV lane, even when driving alone. Spend some time researching and talk to an expert on electricity matters, such as The Electric Connection, and decide if it is time for you to jump board with the electronic vehicle trend.

This year I’m seriously jazzed about the 2012 Emmy nominees – especially for Outstanding Lighting Design. Admittedly, I’m a sucker for theatrics (dating back to long before those college stage makeup classes and my Cirque du Soilel-level Halloween costumes) but honestly, these nominees are amazing. Here’s what the Academy has laid out for us this year:

Outstanding Lighting Design/Lighting Direction For A Variety Series

So You Think You Can Dance

Last year’s winner is at it again, producing number after flashy number. Lighting designer Robert Barnhart along with lighting directors Matt Firestone, Pete Radice, and Patrick Boozer are ones to beat, for sure. Check out this dramatic jazz piece from the Season 8 finale, it’s truly unforgettable:

Dancing With The Stars

This show is a first time nominee in the category, but lighting designer Simon Miles and lighting directors Matthew Cotter and Suzanne Sotello are definitely ones to watch out for. Check out this Halloween-themed Paso Doble featuring Ricki Lake, and you’ll understand why this lighting team has earned a coveted nomination:

American Idol

This program won the title in 2009, and this year the same team of lighting designer Kieran Healy, and lighting directors Joshua Hutchings, George Harvey, and Matthew McAdam are at it again. This highly talented group might just have what it takes to win again. See for yourself in this clip of Phillip Phillips (season 11 winner) singing at the Idol finale:

The Voice

Another newcomer in the category, The Voice has really made a splash in its second season. Lighting team Oscar Dominguez (designer) and Daniel K. Boland (director) have made sure that the voices aren’t the only remarkable thing about this show. Check out this video of season 2 winner Jermaine Paul (from team Blake) and you’ll see what I mean: