Your lights and appliances are working fine, so that means your wiring is too, right? Not so much. Seldom inspected after installation, the wiring in your home may need an update, especially if your home is more than 40 years old.

Installing sufficient wiring goes beyond safety. It also means enhancing your home’s functionality, reliability, and safety to keep up with today’s ever-increasing power needs. This applies not only to the installation of current electrical wiring, but wiring for your phone, Internet, cable, and more.

According to the NFPA (National Fire Prevention Association), faulty wiring is the leading cause for residential fires. The National Electric Code (NEC) updates electrical codes and standards for outlets and wiring every three years. Their mission is to keep up with technology designed to keep your home and family safe. Has the wiring in your home gotten any attention since the 2014 NEC code updates? Chances are it’s been far longer than that.   

Aluminum wiring used in the 60s and 70s, non-metallic wiring installed in the 40s and 50s, and knob and tube wiring in pre-1930s homes are well-known safety hazards, as are loose connections and frayed wires resulting from wear-and-tear.  

These are an enormous safety hazard – for you and your electronics. Without proper grounding, electrical excesses have nowhere to go but into your devices – or you – even if you have a surge protector. Reduce shock risks by rapidly addressing this sign of wiring that is way behind the times.

Identified by the “TEST” and “RESET” buttons on receptacles, GFCIs protect you from shock in high moisture areas. They are currently required in bathrooms, kitchens, laundry rooms, utility rooms, garages, spa/pool areas, unfinished crawlspaces/basements, and any areas outside of your home. If you are lacking these inexpensive, easy-to-install devices in any of these areas, you may be in for a shocking experience.

AFCIs prevent fire by acting as a circuit breaker, which disconnects in the event of a potentially dangerous arc. They are required in bedrooms in all 50 states, though some states require them in all circuits throughout the home.

Childproof outlets require equal pressure in all prongs simultaneously for electricity to flow. They cost pennies more than traditional outlets and are required in all newly built homes.

How many amps power your home? While 60 amps may have been sufficient in the past, today’s homes often need 100 to 200 amps to successfully operate the glut of large and technologically advanced appliances you use simultaneously, from mobile devices and flat screens to your refrigerator and air conditioner. Without an adequate power supply, you could end up damaging these sensitive items beyond repair.

Protect your family and home, ensuring the smooth, efficient operation of all things electrical while boosting the value of your property. Contact Mr. Electric® for an electrical safety and wiring inspection today.

Turkey day is upon us, when relatives and friends descend from near and far to gobble stuffing, watch NFL football and reflect on the things they are thankful for. In the spirit of the holiday, make sure that by the end of the day you can still be grateful for your family's continued health and prosperity by following these Thanksgiving safety tips.

Careful with the Deep Fried Turkey 

Who needs a roaster? Adventuresome chefs who want to create a memorable Thanksgiving are turning to the deep fryer to cook the turkey. The process involves gallons of hot oil, so take precautions if you decide to use this method to prepare your bird:

With some prudence and awareness, you can enjoy your crispy bird safely. 

Beware Open Flames

Candles are a great way to provide atmosphere, but make sure they aren't close to any curtains or other flammable materials, and aren't in danger of getting knocked over. Never leave a burning candle unattended. The same goes for your gas burners. 

Clean up Your Clutter

Your guests might not be familiar with the idiosyncrasies of your house, like the children's cars scattered about the living room. Make sure any power cords and extensions cords aren't crossing the floor or walkway and posing potential trip hazards. 

Mind the Children

We expect adults to practice common sense, but children may not be so prudent. If you aren't used to having kids around, be aware that knives, candles, hot foods, liquids, matches and stoves might all prove irresistible to a curious youngster. Keep anything dangerous out of reach, and make sure the kids are supervised.

LED light bulbs and fixtures are the best alternatives for many reasons.

LED lights are available in several shades of white. These shades are referred to as a bulb’s correlated color temperature (National Institute of General Medical Sciences, states that, “Circadian rhythms are physical, mental and behavioral changes that follow a roughly 24-hour cycle, responding primarily to light and darkness in an organism’s environment.”

According to writes, “Several studies have documented the importance of light in reducing depression, decreasing fatigue, improving alertness, modulating circadian rhythms, and treating conditions such as hyperbilirubinemia among infants. Further, the presence of windows in the workplace and access to daylight have been linked with increased satisfaction with the work environment.” Windows are the best method of accessing daylight, but cool white LED lights along with the right color temperatures at the right times, can have the same effect on the body.

Warmer color temperatures lead to the release of melatonin, which causes drowsiness. This is appropriate during bedtime hours, but causes problems for those who need to stay awake, such as overnight nurses and doctors. Introducing natural or cool white light to hallways, operating rooms, and nurse stations can help hospital staff, especially overnight workers, feel more alert and energetic.

EPA has a list of cleanup procedures, such as having everyone leave the room, opening a doors or windows, shutting off heat and air-conditioning systems, and other specific instructions.

Fluorescent and incandescent bulbs also emit low doses of UV radiation that can damage not only facility materials but can also damage skin and eyes. According to a CBSLA.com discusses the results of another study that had similar findings. In this article, it is said that, “. . . exposure to the (fluorescent) bulbs could lead to premature aging and cancer.”

Continued UV exposure is also harmful to the eyes. A LED lights won’t flicker or emit any color spikes. Color fluctuations and flicker can cause negative effects, such as headaches and dizziness. When used for hospital lighting, LED bulbs and fixtures can improve overall health and eliminate the possibility of additional health risks posed by fluorescent and incandescent bulbs.

Seeing colors as they truly are is critical in health care environments. Inaccurate color rendering of skin or blood could lead to a misdiagnosis or failure to see signs of infection or jaundice. The spectral graph below can be helpful in understanding the advantage of high-CRI light sources. Lights with a low CRI will show fewer colors while high-CRI lights cover more of the spectrum. A light source’s ability to show more colors increases its accuracy in revealing the true colors of people, objects, and surroundings.

FreemanWhite, a health-care-focused design firm reports, “. . .light fixtures with a high CRI . . .  help caregivers assess rashes, lesions, and skin pigmentation.” They go on to say, “In the interest of avoiding liability claims, better lighting quality can enhance a caregiver’s ability to diagnose correctly, identify reactions, prevent secondary infections, and minimize readmissions.” High-CRI LED lights can also help prevent medication errors.

Another method of LED hospital lighting control is the use of occupancy sensors. These sensors will save money beyond those that result from reduced energy consumption. Sensors will also extend the life span of bulbs and fixtures even further by turning them off when no one is in the area. These sensors are best suited for low-traffic areas.

Sometimes replacing a light switch or an outlet can be a quick job done in an afternoon. You may think looking up a ‘how to’ video on YouTube is all you need. But remember, electricity is dangerous and if you are not sure about what you are doing, it is better left to a professional. Here are a few troubleshooting tips to review before calling a professional electrician.

A common problem that can occur is circuit breaker tripping. If you find that power to certain parts of your home is constantly being shut off and requires you to use the circuit breaker to turn it back on, the line could be overloaded. Having to many appliances or electrical devices on one circuit can be too much for the line to handle and will cause the breaker to trip. To avoid this, try placing devices on a different circuit or unplugging appliances before you begin using another. If you continue to have problems you may have an issue with the circuit or one of your electrical devices. It may be best to call an electrician to diagnose the problem further.

Light bulbs must be replaced from time to time; it’s unavoidable. A common problem you could experience is dim or flickering bulbs. Turn off the power to the bulb and replace it with one you know is working properly. If the problem persists, there may be an issue with the socket or the wiring and it is best that an electrician takes a look at the problem.

While there are countless problems you can experience in your home, a good rule of thumb is to stay within your comfort zone. Everyone has a different level of knowledge about electrical systems but if a problem exceeds your understanding, it is best left to a professional. If you are unfamiliar with rewiring new sockets and switches, leave them alone and call an electrician. Tampering and altering wire connections can result in serious injury if not done properly. Be very cautious if you come across an exposed wire or are constantly being shocked, you could have a major safety issue on your hands. Make sure you shut off all power to the area or appliance you are unsure about and contact a professional.