Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.

As a facility manager or building owner, it is nearly impossible to know everything about everything in your building. But it is vital to know something about everything, and that goes for your facilities lighting system too. Whether you manage a warehouse, factory, or other industrial sized building or space, the lighting is a huge factor of many things including safety, productivity, and consistency in the work in your facility.

So while you don’t need to know every facility managers and building owners should know about there lighting system and how lighting can make all the difference in various amounts of ways.

1. Not all lights are created equal. This is an obvious one, not all lighting technologies are created the same and all output at different levels. Firstly you have lighting technologies that are less efficient than others. Such as metal halide and HPS which are 2-3 times less efficient than LED technology is. Then you also have efficiency based on a “product to product” basis. For example; while LED is the clear winner in efficiency over metal halide (and really any other lighting technology), one LED product from one company isn’t going to be the same as the next company’s LED product. This is where you really need to dig deep and find the company that offers the most efficient lighting products over all other companies.

Key takeaway? First, understand that LED is the most efficient in a general sense, but also understand that each company and product varies on its own personal efficiency and you should always do your homework before going with one LED product over another!

2. New lighting system upgrade costs can be reduced with rebates. This is only a true statement when you are buying commercially qualified lighting products that are DesignLights Consortium qualified. return on investment overtime by decreased energy costs associated with running your lights. Obviously this ROI period will vary depending on how long you run your lights per day on average, but especially in big facilities they almost always are used often and thus, provide a good and even quick payback period.

4. Create safer environments with a proper lighting system. With low quality light output, you create an unsafe environment that can cause various issues. Lighting fixtures that aren’t outputting the proper amount of light after a few years into there life is all caused reasoning to retrofit over fully replace.

A backyard pool provides years of fun for your entire family. Gatherings are so much more exciting when there’s a pool available. The sultry Tampa and St. Petersburg evenings provide a wonderful opportunity for adults to entertain around the pool patio, indulging in a late night dip. There’s no more inviting sight than a sparkling pool, just waiting for you and your family.

One of the best ways to enhance your poolscape after the sun goes down is by installing lighting. Pool lights illuminate the dazzling water and create a safe night time swimming environment. They provide security, especially when there are little ones about. But, when your lights start to act up-dimming, cutting on and off, or going out for no reason, you need to locate the source of the interruption in your pool lighting—and fast.

With all the bad weather we have been hammered with this winter, our electric power stations have been maxed out trying to keep up with the demand for electricity.  With the cold, another problem has been water pipes freezing at the electric generating stations causing them to have to shut down for repairs.  Long story short, over 55 million people in America this year have dealt with power shortages.  Either being rolling blackouts, or simply no power for days.  I have received multiple inquiries from customers wanting to know if there is an alternative means to keeping the electricity on in their home without using a gas-powered generator.  Their reasons for not being able to use a gas powered generator ranged from “I live in a HOA where generators are not allowed on the outside of our home and I can’t put it on the inside due to noise and fumes,” to “I don’t have any place outside to put the generator that guarantees it won’t be tampered with or stolen.”  Some of my customers that live in condos or town homes only have a balcony which really “limits them on space.”

Halloween is less than one month away! If you’re thinking of decorating your home for the holiday, nothing can help turn your house into a festive sight like lighting. In minutes, you can turn your quaint cottage a ghoulish green, make your bungalow glow orange, or paint your front lawn an eerie yellow. Suddenly, your charming home becomes mysterious and thrilling to trick-or-treaters and passersby.