Any building, in any industry, in any area of the world, is susceptible to having potentially hazardous and radioactive exit signs installed throughout their building.

This could mean they are in schools, near your office, or anywhere else where a radioactive setting probably isn’t a desired situation to be in.

This is why we thought it was necessary to create this post to help and guide you towards identifying, removing, and finally replacing your radioactive exit signs with new signs that are much safer and even efficient, saving you money over other alternatives.

Firstly before we can remove and replace these seemingly nuclear exit signs, you have to be able to identify if you have them or not. But before that, lets explain what exactly makes these exit signs radioactive.

How are some exit signs radioactive?

Just the same way as some exit signs are safe, it is all in the way they are built. For some reason, whether it be technology of the time or something else, people assumed it was a good idea to create exit signs with Tritium, also known as 3H or H-3. Tritium is a radioactive isotope of hydrogen, causing exit signs made with this to be radioactive by default. The only seemingly positive upside to these exit signs is that they are non-electrical, meaning they won’t rack up anything in electricity bills.

But before you become alarmed with what we have shared with you so far, tritium emits only a low-energy beta radiation, which in turn causes the sealed glass tube it is in to glow (causing the exit sign to give off the illumination it requires). Thankfully, it is rather well known that this type of radiation can hardly (if at all) penetrate a piece of paper or clothing. So while yes it is a very low level (energy wise) type of radiation, the fact that there are alternatives that will remove radiation entirely from your building is all the reason to uninstall your tritium exit signs and replace them with something more safe, like LED exit signs.

Now that you understand the technology and how tritium in exit signs work a little bit more, let’s go over how exactly you can identify whether or not you have these types of exit signs in your building.

Identifying a radioactive exit sign should be fairly easy. All of these signs are required to have some sort of “Caution of Radioactive Material” warning on the fixture.

If you do find such a warning label, it is safe to say your light is made of tritium. Another tell-tale sign is whether or not your signs are connected to an electrical source or not as tritium signs do not require any such connection.

Once you’ve identified if you have a tritium exit sign or not, if you do happen to have one, you may continue on to removing and replacing it with the alternative exit sign, LED.

As with any lighting fixture, we recommend to bring in a professional contractor to do the job. But as a general guideline, you can typically recycle your tritium signs by returning them to the manufacturer or place of purchase.

If you purchased the building with them pre-installed and are unsure of where they came from after inspection of the signs for any brand markings, you can try two things:

1: Try contacting the previous building owner or collect records of where they were manufactured

2: Recycle them with a third party. like these), buying them, then installing them yourself or with a professional (we recommend a professional).

Here are a few things you should remember and keep in mind when dealing with a building that has radioactive exit signs:

Eric Lebersfeld and his dedicated Capitol Lighting team have expanded their reach and literally broadened the horizon toward “Making Lives Brighter.”  Together, they have enriched the lives of many and remain gratefully committed to their work with Habitat for Humanity.

Most recently, Habitat for Humanity Palm Beach County honored Lebersfeld at their gala celebration for his outstanding service and commitment.  Lebersfeld and the Capitol Lighting team remain faithful supporters of Habitat for Humanity and look forward to continuing the relationship and investing their resources in this noble organization.

Capitol contributions to Habitat for Humanity include:

•Donating over $100,000 in cash and products just this year.

•Investing their time and supporting the cause for almost 10 years.

•Developing the Making Lives Brighter Campaign with partner and spokesperson Rob-Van-Winkle, aka Vanilla Ice, to better serve the community and expand gift-giving capabilities.

• Bringing comfort to inhabitants, Capitol Lighting collects old lighting fixtures to be donated to Habitat and then offers donors a 10% discount towards new lighting purchases.

Members of the Capitol Lighting family enjoyed an evening of celebration and an awe-inspiring acknowledgement of their efforts on behalf of Habitat for Humanity.

For his work over the past 10 years, Habitat for Humanity Palm Beach County appointed Lebersfeld as an honoree.

Here are some excerpts from Lebersfeld’s speech at Habitat for Humanity’s Gala Celebration:

October 5, 2013

“So, how did it come to be that a little Jewish boy from New Jersey who sells lights for a living ends up being honored by a big international Christian Ministry that builds houses? “

Lebersfeld credits his parents, who taught him by their example to live his life in a certain way, to see what connects us as human beings, rather than what divides us:

“If one elevates their thinking just a little bit, we come to realize that the small differences between us are easily dwarfed by the commonalities we all share. 
The quality of a person is not made up by whom they know, what they have or how they look, but by who they are, what they create and how they can add to the lives of others.”

Lebersfeld went on to impart some of the history behind Capitol Lighting, a family-owned business that began in 1924 with his great-grandparents:

“Together, they started Capitol Lighting and began our mission to make lives brighter. 
They did this literally and figuratively. For almost 90 years, Capitol Lighting has been on a quest of making the lives of our customers, our communities, our vendors and most importantly, our employees – brighter”.

“Habitat’s stated mission is that of “building hope with homes”. Their organization is filled with dedicated and passionate people striving to provide deserving and hard working families with an incredible gift. They also have provided me personally and every member of my team who has worked on a habitat project the gift of allowing us to do a mitzvah – a good deed”.

“Our goals are aligned and Capitol’s and Habitat’s working together makes all the sense in world”.

Lebersfeld acknowledged with gratitude Capitol Lighting’s spokesperson, Rob Van Winkle, also known as Vanilla Ice, for boosting the Making Lives Brighter campaign and helping Capitol to donate well over $100,000 to Habitat.

He concluded his remarks by whole-heartedly thanking Habitat for Humanity for allowing Capitol Lighting the opportunity to support their good work: “It allows us to fulfill our mission while helping you fulfill yours”.

Lebersfeld also vowed his continued support for Habitat for Humanity, as he thanked Mike Campbell, director of Habitat, and Ana Vento of Vento Designs for making the evening such a success.

Having smoke alarms is one of the essential ways you can protect your family in your home. The NFPA (National Fire Protection Association) has estimated that nearly 70 percent of those who perish in a house fire were in homes where there was no smoke alarm. Additionally, it is estimated that nearly one thousand deaths per year could be prevented by installing smoke alarms in every home. Learn more about the considerations you must make regarding smoke alarms and then call a Los Angeles electrical company, such as The Electric Connection, to install this important device today.

Building Codes

There are building codes that mandate the installation of smoke alarms. These are developed at both the state and local level. Since there are so many codes and requirements you must keep in mind, it is recommended that you find an electrician in Los Angeles that has a thorough knowledge of NFPA 72 – National Fire Alarm Code as well as these local ordinances.

Location

It is important not only to have a smoke detector, but also to install enough and install them in a proper location. It’s important to install the number of smoke detectors that are required in your area. Additionally, connecting the detectors, means that there will be an early warning if a fire breaks out in another part of the home. When working with an electrician, Los Angeles residents should request that the detector be mounted on the ceiling or high on the wall.

Power Source

A smoke alarm can operate on batteries, electrical systems or a combination. An alarm that operates on both is most desirable, since it protects you even if there is a power outage or dead battery situation. Testing your smoke alarm regularly is vitally important to make certain it will be there for you when you need it.

If you want to talk to a Los Angeles Electrician about installing a smoke alarm system in your home, visit us at ElectricConnection.com or call us at The Electric Connection today.

Local Dallas and Plano Electrician, ElectricMan Inc. Performs Their Landmark 10,000th Job For a Local Veteran and Retired School District Employee.

Dallas, TX based ElectricMan Inc., a licensed Dallas and Plano electrician with over 27 years of experience providing electrical repair and installation services, has reached a landmark in their service to the local community by performing their ten thousandth job for local homeowner, retired military veteran, and retired school district employee Mr. Frank Norwood.

As a thank you to Mr. Norwood for his loyal repeat business and a celebration of this huge milestone for the company, ElectricMan Inc. installed a new ceiling fan and ceiling fan rated brace kit in Mr. Norwood’s master bedroom at no charge.  Master electrician and Owner of ElectricMan Inc., Nick Schaeffer, said “We are very excited to have passed this milestone as a company, and are honored and happy to provide this complimentary service to Mr. Norwood, a gentleman who has given so much for this country and the community.”

ElectricMan Inc. is committed to providing the absolute best customer service and reliability in serving the local community’s electrical repair and installation needs.  In light of the current status of many businesses, for a local company to reach the landmark of 10,000 jobs certainly speaks to their character and the quality of service that they provide.

About ElectricMan Inc.

ElectricMan, Inc. has more than 27 years of experience in residential and commercial electrical work and is a family owned and operated business based in Dallas, TX that puts family first. ElectricMan’s motto is “Quality Electrical Services”. We achieve this through our employees. Our professional, licensed, experienced technicians are here to serve your electrical service and repair needs. For more information, please visit our website at www.electricmaninc.com.

ElectricMan Inc.

13551 Floyd Circle

Dallas, TX 75243

Nick Schaeffer, Owner

NickS@electricmaninc.com

972-792-7270

Although any light will help alleviate the strain on your eyes while looking at a screen, there is a right and wrong type and location for the light to have the best effect. As mentioned earlier, bias lighting is placed behind your screen to establish a brighter field of view so that your eyes aren’t constantly trying to find a balance between light and dark. Bias lighting illuminates a room without creating glare or reflections on your screen, shining directly in your eyes, or affecting how you see contrast and colors. Other sources of light, such as ceiling lights or lamps, can do all of the above.

If light is shining onto your screen, there’s going to be a noticeable difference in how the picture appears. Colors won’t be as vivid, and the screen might be hazy. In an attempt to remedy the situation, you could adjust the brightness and contrast. However, these adjustments will decrease the life span of the bulb or LEDs in your screen. The adjustments will also result in increased energy consumption along with a higher electric bill.

Adding light behind your screen instead of in front of it will eliminate any color or contrast issues. Dark scenes or colors will look richer against a white illuminated background. The picture below demonstrates how dark colors are lost against a dark background.

howtogeek.com, “. . .  you want a bulb temperature that is as close as possible (if not identical) to the reference point used in the industry that both manufactures the screens you’re looking at as well as creates content for said screens and that’s 6500K.” He goes on to say that, “The bulbs (be they CFL or LED) inside your HDTV or monitor are calibrated to 6500K, the film and digital video shot is color corrected to have a 6500K white reference point, and the editing suites where content is edited and worked on have 6500K bias light.”

So what exactly does 6500K mean? Correlated color temperature (CRI). CRI refers to how accurately a light source reveals the true colors of objects, people, and surroundings and involves a distinct testing method with comparisons to incandescent light or daylight. A light source with a CRI close to 100 shows colors very similarly to how daylight or incandescent light shows those same colors. To get the best picture, you’ll want bias lighting with a CRI as close as possible to 100.

We carry LED strip lights that are great TV backlighting options and will help you achieve the best picture on your screen.

Our variable color temperature controller and remote. The strip also has a CRI of 91, which will show screen colors accurately. This strip can be purchased in 3.28- or 16.4-foot lengths that can be cut and connected where needed with strip light connectors.

Another great option is our 6500K LED strip with LC2 connector. It has a CRI of 79 and is available in 1.64-, 3.28-, and 16.4-foot lengths. The peel-and-stick strip can be cut and connected where needed with compatible strip light connectors.

A kit in cool white is also available and is a convenient bias lighting solution. It has a 6500K color temperature, 79 CRI, and includes everything needed for installation—power supply, dimmer, remote, connectors, etc.

The strip lights listed above have peel-and-stick adhesive backings and can be cut or ordered in lengths to fit every screen size; strips are marked with designated cut lines. If you don’t order a kit, you will need a power supply and can purchase a controller with remote for dimming.

An easy installation method is to use a continuous length of strip around the back of your screen. For a cleaner look, you can cut the strips at all four corners of your screen. If you plan on cutting your LED strip lights, you will need 4 connectors (already included with the kit). All compatible installation supplies will be listed under the accessories tab on each product page. The following instructions explain how to install LED strip lights by cutting them into sections. Note that installation methods will differ depending on the strip you choose.

1. Cut your LED strip lights into lengths that fit the back of your screen. Because we offer different lengths, you might be able to order separate strips that will fit all four sides of your screen.