It’s always easy to tell when summer rolls around.  The temperature outside soars, and so does your electricity bill.  Wouldn’t it be great if a top Dallas electrician could save you money on your electric bill?

Everyone knows why your bills get so expensive; you’re running your AC almost all the time.  In fact, the condenser for your air conditioning unit uses more electricity during the summer months than any other appliance in your home, even notorious energy hogs like your refrigerator. There are things an electrician can do to save you money, and electric safety tips you need to know to protect your home, business, and loved ones from disaster.

These days most people call an AC service company the minute an air conditioning problem comes up.   That isn’t always the correct move, though.  In my experience, about half of all the problems that arise with air conditioning systems are electrical problems.  Some of my best customers began using my service because I could help them figure out whether they should be calling an electrician or an HVAC technician to solve their problem.  Obviously, if the problem is the AC unit or condenser, an AC repairman is the way to go, but he doesn’t necessarily understand the details of your home or business electrical system.  There are a few things you should know about your air conditioner from the electrician’s point of view.

LED light bulbs and fixtures are the best alternatives for many reasons.

LED lights are available in several shades of white. These shades are referred to as a bulb’s correlated color temperature (National Institute of General Medical Sciences, states that, “Circadian rhythms are physical, mental and behavioral changes that follow a roughly 24-hour cycle, responding primarily to light and darkness in an organism’s environment.”

According to writes, “Several studies have documented the importance of light in reducing depression, decreasing fatigue, improving alertness, modulating circadian rhythms, and treating conditions such as hyperbilirubinemia among infants. Further, the presence of windows in the workplace and access to daylight have been linked with increased satisfaction with the work environment.” Windows are the best method of accessing daylight, but cool white LED lights along with the right color temperatures at the right times, can have the same effect on the body.

Warmer color temperatures lead to the release of melatonin, which causes drowsiness. This is appropriate during bedtime hours, but causes problems for those who need to stay awake, such as overnight nurses and doctors. Introducing natural or cool white light to hallways, operating rooms, and nurse stations can help hospital staff, especially overnight workers, feel more alert and energetic.

EPA has a list of cleanup procedures, such as having everyone leave the room, opening a doors or windows, shutting off heat and air-conditioning systems, and other specific instructions.

Fluorescent and incandescent bulbs also emit low doses of UV radiation that can damage not only facility materials but can also damage skin and eyes. According to a CBSLA.com discusses the results of another study that had similar findings. In this article, it is said that, “. . . exposure to the (fluorescent) bulbs could lead to premature aging and cancer.”

Continued UV exposure is also harmful to the eyes. A LED lights won’t flicker or emit any color spikes. Color fluctuations and flicker can cause negative effects, such as headaches and dizziness. When used for hospital lighting, LED bulbs and fixtures can improve overall health and eliminate the possibility of additional health risks posed by fluorescent and incandescent bulbs.

Seeing colors as they truly are is critical in health care environments. Inaccurate color rendering of skin or blood could lead to a misdiagnosis or failure to see signs of infection or jaundice. The spectral graph below can be helpful in understanding the advantage of high-CRI light sources. Lights with a low CRI will show fewer colors while high-CRI lights cover more of the spectrum. A light source’s ability to show more colors increases its accuracy in revealing the true colors of people, objects, and surroundings.

FreemanWhite, a health-care-focused design firm reports, “. . .light fixtures with a high CRI . . .  help caregivers assess rashes, lesions, and skin pigmentation.” They go on to say, “In the interest of avoiding liability claims, better lighting quality can enhance a caregiver’s ability to diagnose correctly, identify reactions, prevent secondary infections, and minimize readmissions.” High-CRI LED lights can also help prevent medication errors.

Another method of LED hospital lighting control is the use of occupancy sensors. These sensors will save money beyond those that result from reduced energy consumption. Sensors will also extend the life span of bulbs and fixtures even further by turning them off when no one is in the area. These sensors are best suited for low-traffic areas.

LEED) is a program that offers certifications for green buildings. The third-party verification program was created by the U.S. Green Building Council (USGBC) as a means for healthier, sustainable, environmentally friendly, more efficient, buildings, homes, and neighborhoods. In a nutshell, LEED supplies the guidelines for creating a green building. Using individual points-based rating systems that differ by project type, building projects can achieve Certified, Silver, Gold, or Platinum statuses. Project types can include new building design and construction, building operations and maintenance, interior design and construction, homes, and neighborhood development. For each project type, LEED has a list of credits with specific requirements regarding anything from building materials to bicycle storage. Points are awarded based on the degree to which the requirements are met. There are several credits that include LED lighting is the first choice of any builder trying to achieve an LEED status.

The following LEED credits relate to lighting for new construction:

full-cutoff LED wall packs that are designed to reduce glare by emitting illumination downward instead of outward. Many indoor and outdoor LED lights come with or can be used with dusk-to-dawn or PIR motion sensors to prevent wasted light.

A19 bulbs to powerful EAp2 – Minimum Energy Performance

Buildings must meet a minimum level of energy efficiency to receive points for this credit. The goal is to minimize environmental and economic problems that can be caused by high energy use. As mentioned above, LED lights are extremely efficient and can dramatically reduce a building’s carbon footprint.

dimmable under-hutch LED strip lights with handheld remotes and bulbs, or other dimmers.

SFGATE, “The Organisation for Economic Co-operation and Development (OECD) warns that, given the current trends, energy-related emissions will increase by 70 percent by 2050. This can accelerate the negative consequences of climate change, including higher temperatures and a rise in the frequency of extreme weather events.” Lessening energy consumption with LED lights and renewable energy sources will reduce greenhouse gas emissions and help prevent that prediction.

website, the USGBC states that 92.2 percent of 7,100 LEED-certified new construction projects are improving energy performance by at least 10.5 percent. In addition to other methods of energy improvements, lighting plays a key role. One building can have hundreds of lights. Using LED lights will not only help achieve an LEED status, but they will also contribute to a greener future.