Technology is advancing at a dizzying pace. What used to be the ‘latest’ and ‘most advanced’ devices yesterday becomes redundant today. When people embrace any technology, they do so because it adds convenience, comfort and safety to their lives in one way or the other. When it comes to your home, all these three aspects matter a great deal. It’s why many people are now veering towards the smart home concept.

Sure, many homeowners already have Internet-based security systems and landscape irrigation systems that are connected to timers etc; but smart homes are designed and set up to do much more than that. Having a smart home is a lot about Wi-Fi connectivity and more. Take a look at some concepts; this will help you create a plan for your smart home.

It’s not uncommon for companies that launch smart home products to say that connecting their devices to the Internet is a breeze. Sure, they are bang on spot most of the times, but what actually matters a great deal is the Wi-Fi connectivity in your home. These are some of the things you will have to keep in view while planning your smart home:

This is vital, and it’s something you should keep in view while planning your first smart home. The longer the distance the radio waves have to travel, more the connectivity issues. The best way to overcome this kind of an issue is to install the Wi-Fi router at the center of your property and on the ground floor.

You will find a number of products which claim they are able to extend the Internet connection in your home. The simple fact is that multimedia over coaxial power-line adapters, network extenders etc tend to slow down the signal by around 50% and that reduces the consistency of the network. Of course, you won’t find any issues with driving a motion sensor or a smart bulb; however, you might just find it challenging to stream a movie to your tablet/laptop, only because it can’t figure out which Wi-Fi router it should connect to.

At times, installing a network of Ethernet cables turns out to be the best solution. You can use cable runs to install your smart home hub devices in spots that are more accessible. The devices that are connected to these hubs will function more smoothly if you do this. If your home is already wired for telephones, hardwiring for Ethernet won’t be too difficult. You will need to speak with your electrician and check whether he would be able to run an extra cable to the point you need it at, without too much of drilling and sawing.

When you are planning your smart home, ensure there are sufficient power points at different places in your house. While certain devices may be battery-powered, many aren’t. So whether it’s a Wi-Fi router/extender, web security camera etc, you will need a power point to plug them in. And of course you don’t want power cords dangling all over your smart home.

Very simply put, if you are building a new smart home or remodeling your existing one, sit down and plan not just for the current smart devices you plan to install, but for future ones as well. Map out a detailed plan and get some advice from the installer too. Coming back to the first point – focus on getting a very good Wi-Fi router and ensure its positioned at the right point on your property.

Very importantly, get a professional to do all the wiring work once you have your entire smart home plan in place. For more information about smart home device and hardwiring solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or by filling out this contact form.

Thanks for reading,1300 169 263

Advanced lighting control systems (ALCS) utilize electronic circuits with a programmable logic controller to automatically adjust lighting levels.  Program a number of variables and light requirements to get the lighting just perfect. This helps in providing the right amount of light where and when it is needed, hence improving energy efficiency and savings.

Advanced lighting control systems provide benefits like automatic scheduling and dimming. Turn lights off based on room occupancy and level of daylight. In so doing, the ALCS adjusts the light levels to match the requirements at any particular time. For example, when a room is empty, lights dim or go off completely. This saves on utility costs.

The sensors communicate with the lighting control system through wired or wireless connections. In some applications, sensors are integrated into the lighting control. While the wired network requires hand wiring of all the devices, the wireless communications use radio frequencies. Therefore several benefits exist over the wired network.

Wireless technology eliminates the need for wiring and is, therefore, cheaper, easy to implement and modify. It provides more flexibility while reducing the planning time for the electrical system. Wireless lighting controls are ideal for hard-to-reach lights. These include places where there are non-accessible or hard ceilings, basements, and other expensive or hard-to-wire areas.

The controller automatically adjusts the level of illumination based on one or a combination of the following variables.

The controls utilize room occupancy or proximity sensors to check for activity in the room or target area. If there is no activity, the controls automatically switch off or dim the lights. The system will then turn the lights to full brightness when room occupancy sensors detect someone within a defined space.

Different lighting levels are required based on the activity. In some applications such as warehouses, there is no need to keep all the lights on when areas are not in use. The lighting control systems will either turn off or dim most of the lights. Some advanced systems provide just enough light in the open spaces. Yet, more light becomes available near shelves where a worker might be picking up or replacing items.

Additional light is required during office hours when people are working. However, this isn’t necessary during the lunch break, or when offices are being cleaned. A combination of controls may be used here. Take advantage of daylight, dim or completely turning off the lights when more natural light filters into the room.

The programmable controls can be used to switch individual or groups of lights depending on time of day. These programs run 7 days a week. Consequently, there’s a separate schedule for weekdays, weekends, and holidays. In an office setup, a timer ensures that all lights, apart from security lights, are turned off at night, during the weekends and on holidays.

Instead of using the lamp at its maximum rating when new, the controls dim the light in certain cases. This reduces the normal wear and tear. As the lamp ages, its level of illumination will decrease. However, instead of the light level going down, the control will decrease the dimming level and maintain the required level of light.

So instead of powering the light at 100% and wasting energy with excess light that is not required, the controller ensures light is powered at a lower percentage. This ensures that required light is provided, but at a lower power consumption.

Factors considered when implementing a lighting system include the need for flexibility, facility size, floor plans, facility use, daylight hours, and building codes. Other considerations include the cost-effectiveness of the system, the ease of use, visual performance and comfort.

In addition to controlling the lights, the advanced lighting control systems help in determining the occupancy patterns. Moreover, the operating status of part or whole sections and the entire system’s performance is monitored. This provides business owners with an opportunity to evaluate the effectiveness of the installation and make adjustments.

If you are planning on renovating or sprucing-up your kitchen, it’s probably a good idea to map out a detailed lighting plan as well. Most people find this a little strange as they feel that lighting in a kitchen isn’t something that needs too much of consideration or planning. It’s just a place where you cook and probably where you have an informal meal after all.

However, the fact is that it’s important to plan kitchen illumination well if you want to make optimal use of your kitchen spaces. Here, we would like to share some basic lighting ideas to create the right balance of functionality and aesthetics.

If you want to get a better idea about what type of lighting would work best for your kitchen, it’s vital to understand how your kitchen spaces relate to the different type of lighting. Let’s start off with understanding what type of bulbs you can use for the best effects:

These bulbs emit a yellowish light and you will now find many artistic versions of these on the market today.

These bulbs throw off a flat, cold light that has a bluish tinge, which lends a very harsh effect to the room.

These have a warm light that makes the place look very inviting and comfortable

These are the latest in light bulb technology and are available in a range of effects including white, cool daylight, warm light, yellow and a range of other colours and hues. Aside from this, LED bulbs are also 80% more energy-efficient than standard bulbs; and most property owners are now opting for these fixtures.

In addition to the types of bulbs used, the style of lighting or the lighting effects are what impact the ambience and appearance of a room. With this in view, here we discuss the different lighting effects that can be used in your kitchen:

This is one of the simplest ways to create the right lighting effect in your kitchen. This type of lighting is designed to help you move comfortably around the room. In most instances this type of lighting comes from grid-style can lighting, widely-spaced, wall and ceiling lamps, semi-translucent skylights or even the natural light that streams in through glass windows and doors. This is the base layer of any lighting plan.

In your kitchen, task lighting would be required to illuminate kitchen counters and food preparation spaces. Since you will be cooking in your kitchen every day, it’s important that the task lighting be planned and installed well. If you have only recessed lighting fixtures in your kitchen, you will feel the lack of focused light when you are cleaning, cooking or prepping in that space.

If you install one-dimensional lighting in the kitchen, it creates unsightly shadows in different areas of the room, while ceiling lighting is ineffective in illuminating spaces like sinks, under counter or cabinet areas etc. On the other hand, if you add special pendant lamps over the counters or even your kitchen island it can prove to be a more practical solution. Under-cabinet lighting can also help in illuminating the cabinets that are positioned there.

This effect doesn’t seem as necessary as ambient or task lighting does in a kitchen space, as the illumination it provides isn’t as functional as the first two. However, it can have a significant impact on the way your kitchen spaces look. If you want to enhance the appeal of your kitchen (regardless of whether you are getting it entirely renovated or are opting for a lighting upgrade), it’s important that you plan your accent lighting well.

As the top Frisco electrician provider in North Texas, we want you to enjoy your home as much as possible, without costly or dangerous electrical problems. Electrical issues or repairs can zap your time, patience, wallet and, in some cases, your health.

ElectricMan is committed to helping you make the most out of your electrical system, appliances and usage, which is why your top Frisco electrician is giving homeowners some tips on how to take good care of your electrical systems and how to get the most out of your home.

 #1 Turn off the lights and lower your bill.

Electric bills these days can give you headaches in and of themselves. However, there are a few things you can do to lower your bills and still enjoy your electricity. Turning off the lights when you’re not in a room; consider installing a motion sensor switch for the outdoor lights you may forget to turn off.  Unplugging an appliance that you’re not using, or even installing alternative power sources like wind turbines and solar panels can significantly reduce your power consumption without infringing on your everyday usage. You can also use indoor generators to power your home without needing to be connected to the power grid.

#2 Keep up with electrical maintenance in your home.

Doing regular electrical maintenance in your home every two years can mean the difference between a happy, powered home and a mess of molten wire and old circuit breakers that don’t work. Hire your local electrician to come take a look at the entire electrical system in your home, and act upon his recommendations as soon as possible to give your home’s electrical wiring a long life.

#3 Take care of your smoke detectors and your smoke detectors will take care of you.

Smoke detectors are an invaluable and potentially life-saving part of any home. Keeping them in good working order and supplied with fresh batteries might just save your life. Be sure to swap the batteries of your smoke detectors every year (coinciding with the time changes is a good way to remember), and change out detectors every five to seven years.

#4 Protect your home with the right equipment.

Another important aspect of being safe and secure in your home to ensure your home is properly equipped with surge protectors, AFCI breakers and GFCI outlets wherever they are needed. These pieces of equipment not only can protect and preserve valuable appliances or expensive wiring, but they can keep you out of harm’s way in case of an electrical emergency in your home.

#5 Hire a professional for electrical remodeling jobs.

Whether you love hanging lamps or dimmer lights, homeowners who are fond of ambient lighting and are in need of some remodeling should always remember to call their top Frisco electrician to carry out the lighting installation. Installing lighting is a very intricate process that can get difficult and dangerous if you don’t know what you’re doing.