Lights are one of the most significant pieces of your home. Making sure each room of your house is properly lit can be a big project (and expense!). Many homeowners are opting for dimmer switches for the versatility and other advantages they offer. If you’ve been considering whether or not dimmer switches would be right for you, read more about their benefits below.

Light control dimmer switches are a valuable asset to your home and are relatively easy to install. They are typically small enough to fit into a regulation wall box designed for a normal light switch, and a qualified electrician should have no problem doing this work for you.

If you have questions about how to have dimmer switches installed in your Austin home, call Bryant Electric Service today at 512-402-8587.

Many of us have considered underfloor heating, especially when we step into the bathroom during a harsh Des Moines winter. Today, our electricians will share many benefits to underfloor heating that you may not have considered. You may find that there is more to underfloor heating than simply a warmer bathroom floor (although that is nice).

Underfloor heating spreads evenly dispersed, rising heat throughout your room’s flooring; heat emanating from the floor warms the air, which then rises toward the ceiling before cooling and falling, only to encounter more warm, rising air. This creates a pocket of cool air stuck in the ceiling of your room, leaving the space from floor to head height a comfortable, warm temperature. Additionally, since the heat doesn’t come from a single source (vent, radiator, etc.), there are no hot or cool spots in the room, the entire space is even heated.

Each room that has an underfloor heating system installed will have its own corresponding thermostat, which effectively removes the need to heat each room to achieve a desired temperature in a single room. For instance, during the night, your home could be relatively cool, except in bedrooms; likewise, certain floors can be kept at a cooler temperature when not in use during daylight hours. This can heavily cut down on energy costs when compared to inefficient whole-house heating systems.

The homes of today are more open and airy than ever, with open-concept living dominating real estate markets across the country. Open spaces are notoriously difficult to heat with radiation or forced air systems, which can create undesirable warm and cool zones in the space. By contrast, underfloor heating works excellently in larger, more open spaces.

In addition to the better, steady stream of heat found in your rooms, you will enjoy a comfortable warming underfoot. While this may seem like a feeling reserved for luxury homes, many other countries use underfloor heaters almost exclusively in new construction for its comfort and efficiency. You will no longer have to hope and wait for the furnace or radiator to kick on for warmth to flood your room, instead you will enjoy a steady stream of warmth coming from beneath.

If you’ve ever renovated a home with radiator or ventilation heating, you’ve undoubtedly had to deal with relocating or working around existing HVAC lines. Unlike traditional heating systems, underfloor heating poses little-to-no issues when renovating or remodeling your rooms. Plus, since professionally installed underfloor heating is compatible with most flooring types, you won’t find yourself limited in choices for placing an all-new flooring over your heating system.

Underfloor heating may require a bit more planning and investment to install than fixing an old furnace system would, but the benefits you can gain by adding it to one or more rooms in your home are worth the effort. Be sure to consult one of our Des Moines electricians with your plans for underfloor heating prior to construction for best results, advice, and electrical installation.

Get in touch with our Des Moines electricians today!

From the 1950s to the 1980s, the Federal Pacific Electrical Company (FPE) installed electrical panels in millions of homes across the country. Unfortunately, these electrical panels are basically recipes for disaster—over the years, electricians and home inspectors have found that FPE panels often fail to protect homes from overcurrent or short circuits. The danger seems to happen randomly: even if panels have been installed and working properly for years, a single incident can quickly cause the panel to overheat and create a major fire hazard.

Remember—circuit panels trip in response to unusual surges of electricity. If they fail to trip, as FPE panels often do, those electrical surges cannot be stopped or shut off manually and will move through your home until they run out of fuel or until the wires burn out. This could cause the panel to overheat and catch fire, leading to a potentially serious disaster.

FPE panels may not be up to modern safety codes – electrical safety standards have been updated significantly since the 1980s, and experts say that FPE panels, which were produced from the 50s and into the 80s, do not meet these updated standards. Some of the deficiencies noted by home inspectors include:

FPE panels may have serious design flaws – not only do FPE panels not meet modern safety standards, but they also came with some serious design flaws that weren’t even common among panels built around the same time. Some of the most significant flaws include:

FPE panels may have manufacturing defects – as if that weren’t enough, the Consumer Product Safety Commission (CPSC) has noted a number of defects that make FPE panels unfit for homes, including weak materials used to construct the breakers that may prevent them from tripping and could cause the panel to catch fire.

If you live in an older home and you’re worried your panel might be a danger, call Kolb Electric. Our trained electricians are familiar with the potential hazards of FPE and other outdated panels and can replace your existing panel with a modern panel that will keep your home safe for decades.

For more information about circuit panel replacement in Maryland, Virginia, or Washington, DC, call Kolb Electric today.

It is true that most of the electrical problems you have in your home will need to be taken care of by a licensed electrician. However, there are various smaller problems that you can easily and safely troubleshoot. Here are just a few:

This can be quite bothersome and yet pretty easy to troubleshoot. Begin by checking that the bulb has been screwed in correctly. It needs to be in all the way. If that is in order, check to see that the wattage is correct for the fixture in which it has been fixed. If the wattage is not right, that can be causing overheating and it can even lead to a fire. In the event that the wattage is correct, just replace the old bulb with a new one. If the light is still flickering, then it is possible that the electrical outlet or the cord has a problem.