Electricity is something we use every single day, at home and in our workplace. Commercial and industrial establishments would never be able to function without it, and yet we take it for granted – at least until the time something goes wrong with it. While the electrical fixtures and fittings are all within sight, the wiring and other related installations are typically out of sight. This also means that we don’t really pay much attention to them at all.

What we don’t realise is that while most electrical issues seem like they have arisen out of the blue, there are almost always some warning signs. Electrical issues can result in electrical fires that can be extremely dangerous. Melted wiring is one of the commonest causes of electrical fires. There are a number of things that can lead to melting of electrical wiring, such as:

Electricity anywhere has an electromagnetic field; and the electricity flowing through the wires on your property is that way too. This electromagnetic field is at a certain level and that is why it isn’t really evident. However, at times there is an excessive build-up of electricity in the wiring on your property, which weakens the wires. If you don’t address this issue on time, the wiring will melt and result in arcing, and that is when you hear the crackling, hissing or buzzing sound emanating from wires.

All electrical installations are made to carry a certain amount of power load. Older structures tend to also have decades-old wiring; that is unable to bear the load of current-day, power guzzling electrical appliances and equipment.

If you run too many of these all at once on your property, it results in an overload in the system. Typically when this happens, the fuse connected to that particular circuit blows. If, for some reason, this doesn’t happen and the electricity continues to flow through the system, it will cause the old wiring to melt.

A short circuit is caused when a neutral wire comes in touch with a live wire. Just as in the case of a power overload, if this occurs, the fuse will blow and the electrical supply within that circuit will get disconnected. However, if this doesn’t take place & the electricity keeps flowing through the wires, they will get heated up and melt.

If you find anything out of the ordinary with the electrical installations in your home/commercial establishment, never defer calling in an electrician to check what the issue is. The signs to look out for are arcing in electrical installations, switches and powerpoints that are hot to the touch etc.

Attending to all these issues on time will ensure that you have less problems to deal with, later. Never forget that electrical issues can be very dangerous and the more you defer getting them checked, the more you endanger your safety and that of anyone who lives or works on your property.

The one way to prevent electrical issues from surfacing in this manner, is to opt for preventive electrical maintenance services. As part of these services, the electrician will come in at pre-decided intervals and thoroughly test all the electrical appliances, fixtures, installations and wiring on your premises. If he notices anything out of the ordinary, he will inform you about it and it can be fixed before the issue aggravates and poses a risk to life and property.

We at Allround Electrical are licensed and insured electrical contractors, and offer a range of electrical services to commercial and residential customers. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Businesses cannot afford an interruption in their equipment use and faulty wiring or wiring that is not adequate could ultimately cost the business money. Lighting that does not work properly is also bad for business. It reflects negatively on the establishment and could very well turn customers away. If you want to avoid lost revenue, you will need to fix any electrical issues promptly. The Electric Connection is one business who understands your needs and has the experience necessary to do commercial work.

Picking the Right Electrician for Your Commercial Job

When looking for a commercial electrician, you want to ensure your business is represented by somebody who is professional and courteous. In many cases, the electrician will be in sight of customers and may need to interact with them from time to time. You will want to pick a company whose technicians are neat and tidy. The last thing you need is an individual who is disheveled and making a mess of your space. Another important tip when it comes to choosing an electrician in Glendale is to consider your budget. It is important to get quotes about a job before you hire anybody. Contractors and electricians will have to work together and coordinate in order to get the job done according to schedule. Any electrician who will be performing work should be licensed, bonded and insured. It doesn’t hurt to check the company rating with the Better Business Bureau as well.

MyLEDLightingGuide.com’s

Each kit measures 6.8″ L x 4.9″ W x 1.5″ H and weighs about 1.5 lbs. These lights come in 100-277 (Standard) | 347-480 (High Voltage), and can be installed in environments ranging from -30°C to +45°C. Three color temperatures are available: 4000K | 4500K | 5000K (Standard). MyLEDLightingGuide stocks 5000K, but can order in 4000K or 4500K.

These retrofit kits are specifically designed for smaller fixtures that have bulbs up to 400W. Three models are available to match the right output with your application. These lights fit well into wall packs, highbays, parking lot lights, canopy lights, low bay lights, flood lights. In fact, the only limitation is the fixture itself.

2 models make up the Large Series of LED Retrofit Kits, the 150W and 200W. These lights are powerful enough to retrofit and replace Metal Halide and High Pressure Sodium bulbs all the way to 400W-750W. These lights are designed to provide more than the normal 400W retrofit replacement kits. There are times when more light is needed, and these kits were designed to provide more light than our normal retrofit kits designed to replace 400W Metal Halide

Conclusion

Save

Save

Save

Save

Save