via Wikimedia

2. Ricky Martin wins Song of the Year

Puerto-Rican heart throb Ricky Martin played a huge role in bringing Latin pop to the American music scene during the 41st Grammy Awards show in February of 1999. In December he was rewarded again at the Billboard Music Awards by winning Song of the Year for his hit single “Livin’ La Vida Loca.”

Most often, homeowners choose to have their flat screen TV mounted on a wall. Doing this requires finding studs, deciding on mount brackets, and in most cases adding new electrical outlets. That being said, this is not a job for an amateur or a DIY-enthusiast. Rather, it’s a job for a professional electrician. Keep reading to learn why.

Tilting mounts hold the TV flat against the wall and allows for downward tilting. This is ideal if the TV is going to be mounted up high—perhaps over a fireplace. For other homes, an articulating mount might be the better choice. This places the TV on a retractable arm that allows you to pull the TV out and swivel it.

What will be connected to the TV? You may have a cable box, or some other digital receiving device. Maybe you also have a gaming console. Many of these wires come with relative cables that will need a place.

As we just mentioned, you’ll have a lot of components that go along with your TV. Where will your cable box go? Will you need to have shelving installed as well? These questions will help determine where and how you’ll have the TV installed, and whether or not you’ll need specialized electrical services.

Your professional installer can help you decide this, however it’s a good idea to go into the installation with some sort of idea of where you’ll be most comfortable watching the TV.

Whether you have dry wall, stone, or brick, this will need to be taken into consideration when installing a flat screen TV.

High voltage cords, such as the plug for your TV, are not allowed to go behind walls, according to fire safety codes. This means that your installer may need to add an electrical outlet on the wall where you’re mounting the TV if one does not exist already.

Placing electrical safety in Manassas first is the best rule of thumb where electricity is involved. Did you know that most electrical accidents in the home happen near water? Since that’s the case, we’ll start off with that important electrical safety tip. Here’s that one and four more designed to keep you and your family safe in your Manassas home.

You and your family should always feel safe and secure in your Manassas home. In this digital age when everything from toys to tools to technology relies on electricity, electrical safety in Manassas will help keep you up and running safely.

CCT indicates the hue and tone of white light emitted from a specific bulb or fixture. It’s measured in Kelvins (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K+).

As a light source’s color temperature increases, brightness often increases. While shopping for LED lights, pay close attention to the color temperatures that are available for any one bulb or fixture. Choosing a warm white bulb with a color temperature around 3000K might mean sacrificing some brightness. Whereas, if you choose the natural white version, it’s likely that it will have a higher output.

Any room can benefit from light strip, globe bulb,

In order to understand nanometers, you must first understand the electromagnetic spectrum and wavelengths. The electromagnetic spectrum is the entire range of invisible and visible light, and a wavelength is the distance between peaks of light waves. Wavelengths are measured in nanometers, which are simply units of length that indicate colors of light within the spectrum. Nanometers will tell you how red, green, yellow, purple, etc. a light source really is. These measurements start lower at ultraviolet and increase from green to blue, yellow, orange, and then red. The wavelength of a colored light can be found in the light’s specifications table.

MR16 beam angle in degrees (left to right): 36, 24, 15

Fixtures or bulbs that emit wide beams, such as BR LED bulbs for can lights are great for areas that require a lot of light, such as basements, kitchens, or living rooms. Narrow beam angles like those from can lights with MR LED bulbs are best for highlighting decor or small areas. Globe bulbs, such as G30 LED vanity bulbs, have 360-degree beam angles, which means that they throw light in all directions. Globe bulbs are the perfect choice for centralized light fixtures.

When a light switch or electrical outlet doesn’t function correctly, a professional electrician can trace this back to a variety of causes. First, it’s possible this non-functioning device was never connected to the wiring in your building. Secondly, the circuit affected by a switch or outlet may not be completed because of another component. For example, a switch may control an outlet which is unoccupied by a lamp or any other electrical device. Also, an outlet may be connected to a switch which is in the off position. A third cause might be related to a defective breaker, or a breaker which was tripped or turned off, but never switched back on. However, a fourth possibility may relate to a much larger problem.

Sometimes, a switch or outlet fails when it is damaged by arcing. If the arcing was caused by a connection to aluminum wiring, great potential hazards exist. If your home or building was constructed or renovated before 1972, or during the late sixties, it may contain aluminum wiring. Aluminum wiring was used legally during those years, but outlawed for installation in new homes, commercial buildings, remodels and renovations after it was identified with conditions which could lead to electrical fires.

Although aluminum wiring itself is generally no more hazardous than copper, its splices and connections with other metals present a real hazard because they can become corroded and begin arcing. Because arcing in these connections can lead to a fire within surrounding materials, aluminum wire was discontinued. However, many homes still contain aluminum wiring, and research conducted by the Consumer Product Safety Commission (CPSC) reveals that buildings with aluminum wiring pose a fire risk which is 55 times greater than the risks with similar structures wired with copper. So, if you discover an electrical outlet or switch which doesn’t appear to be functioning correctly, it’s possible this outlet or switch was damaged by a connection with aluminum wiring.

If you have safety questions about this type of problem, or any electrical concerns regarding your residence or commercial building, please contact Bryant Electric Service at 512-402-8587. Our licensed electricians are trained and equipped to perform professional safety inspections, and they can repair any type of electrical problem.