Landscape lighting can add beauty to your home as well as provide increased safety on your property.  Lighting design can be used to light pathways, highlight your homes architecture, and deter intruders.  When considering adding lighting to your landscaping, it is important to find the right balance of lighting.  Focus on adding lighting to main activity areas like driveways, entrances, pathways, dark areas around windows, and stairs and main focal points such as fountains, trees, or statues.  The following landscape lighting basics can help make the most of your lighting.

Up-lighting: Up-lighting is placing a light facing upward toward an object to illuminate it.  This works well for highlighting the focal points of your landscape or home.  Use it sparingly to highlight objects around your yard like statues, trees, flag poles, and fountains.

Down-lighting: Down-lighting is used to illuminate large areas.  It works well for illuminating entertainment areas such as a patio or a deck.  It also helps to deter intruders.

Accent Lighting: Accent lighting is an excellent choice for lighting paths and stairs by placing lights along both edges of a path or a staircase.  This looks beautiful and has the added safety feature of helping prevent people from tripping and falling.  Accent lighting can also add focus to low-lying flowers, shrubs, and ponds.

We get a lot of calls for fluorescent light repair here at Expert Electric. But before calling, always remember that if your fluorescent light fixture is burnt out or flickering, first change the bulbs (fluorescent tubes) to see if this corrects the problem and also save yourself some money. If you are not comfortable changing the bulbs due to location or any other safety concern, we would be very happy to help you. If your fluorescent fixture still does not light up after changing the bulbs then the problem is most likely faulty ballast, or less commonly a possible wiring issue.

Fluorescent light is the product of two components: the lamp and the ballast. The role of the ballast is to boost voltage for short duration; the ballast will then maintain a constant applied limited current to properly operate the lamp. You must use the proper ballast for each type of fluorescent bulb. Bulb types are T12, T8, and HO. While it is tempting to install higher efficiency fluorescent lamps (like T12s or T8s), we must pay special attention to the type of ballast installed in the light fixture or those bulbs will not operate properly.

The ballast technology has improved a lot in the last 15 years.  If you are not upgrading your ballast you won’t see the potential energy savings that efficient fluorescent lighting can provide. The new electronic ballasts operate differently from older electro-magnetic ballasts. They don’t just save you money but out-perform magnetic technology in several ways.

Higher Efficiency: New electronic ballasts provide you with more light and cost less to operate, saving you money and helping the environment. Dimming is also easier with electronic ballasts.

More Control: Electronic ballasts can be manufactured to under drive or overdrive the lamps they support, producing more or less light. This allows you to adjust which areas need more light and which need less light. The lighting pattern can now be changed due to work patterns and specific lighting requirements.

Dimmer Switches: Dimming is also easier with electronic ballasts. Preset your dimmer and it can cut your light by 50% and this will save you money as well.

Less Heat Emission: Electronic solid-state ballasts produce less heat than electromagnetic type ballast. What this means is if you are operating cooling equipment, such as food coolers or air conditioning during summer the electronic ballasts will help you save on cooling costs.

The best part is that with the higher frequency electronic ballasts, there is no flicker or buzz. There are many benefits to high efficient ballasts and we recommend you take advantage of them.

Christmas is upon us again and more than any other time of year, it’s the time of year where people put strain on their electrical system.  The lights on your house and the beautiful decorations you’ve been storing in your attic finally are brought out and plugged in for your friends and neighbors to view and appreciate.  And, of course, the vast majority of homes you visit have at least one Christmas tree.  Since most of these things are electrical, it’s probably not a surprise to you that, as a top Dallas electrician, I start getting a lot of calls this time of year.  Though it’s always nice to have the business with Christmas so close, I thought it’d be great to share with ways to avoid wiring problems with your Christmas decorations this year:

 In general, there are a few important tips that can help you avoid wiring problems.  If your lights look frayed or dangerous, they should always be replaced or repaired before using them, frayed wiring are hazardous.  You should take care that your electrical source is safe before you even begin the installation process.  To avoid the potential for overloads, you should have dedicated circuits installed for your holiday decorations.

Most importantly, you should never try to supply power for your lights without contacting a top Dallas electrician to help you install the necessary equipment and make the necessary safety precautions.  Short cuts are potentially dangerous. I can remember one example where a customer had supplied power to their lights by splicing an extension cord directly into their circuit breaker box!  Even worse, they’d shut the breaker box door, pinching the cabling!  Left unchecked, even if this hadn’t started a fire, damage from a power surge or overload could have easily destroyed their whole breaker, meaning they’d have to spend thousands to repair the damage at the absolute worst time of year!

Warm weather and clear skies means it is finally barbeque season once again! May is National Barbeque Month, and we are definitely in the festive spirit. But before you get ready to fire up the grill and bust out the pool rafts, make electrical safety a priority. It might be time for an outdoor outlet upgrade to keep your parties running smoothly this summer.

So just what do you need when it comes to outdoor electrical outlets? Make certain to have ground fault circuit interrupters (GFCIs) installed outdoors for your outlets to protect from serious electrical problems. It’s also always a good idea to have additional outlets installed if possible, especially if find yourself running extension cords across your deck that have become a safety hazard.

Don’t overlook the manual warning of certain appliances that say “not for outdoor use.” It’s always safer to double-check before running into a problem later on. Make sure that electrical appliances are unplugged and turned off when not in use or left unattended.

Just like your outlets and appliances, extension cords need to be rated for outdoor use when you are using them in your backyard. If you must have extension cords running across your backyard during a barbeque, make sure to keep it out of the walkway and away from where children will be playing.

If a rainstorm begins while you’re working as a master chef outside on your electric grill, don’t be a hero for the burgers. Stay safe and head into the kitchen with a backup plan to avoid the risk of electric shock.

Don’t kick off barbeque season without getting pools and spas inspected by an electrician who can make sure you’re backyard is safe and ready for the summer. This is also a good time to make sure you know where electrical circuits and breakers are in case of an emergency.

If you need any help making your backyard barbeque-ready, our professionals can make your electrical renovations and fix-ups a breeze.

Rats and mice are quite common house pests; once they find your home to be a safe place to live in and that there are different sources of food there, they will be reluctant to leave. Not only do they pose a health hazard, they also tend to cause a lot of damage to various features on your property and will chew through the insulation of your electrical wiring.

This can affect the system and impact the supply of electricity throughout your property and can be a fire hazard as well. Here are some effective tips to prevent rodent damage to the electrical wiring in your home:

Since rodents are nocturnal creatures, you won’t really see them running around your home in the daytime. However, if you are wary, you will surely hear scratching and chewing sounds in the walls of your homes. You may also hear scurrying noises coming from the attic. You should look out for nesting material or droppings and will typically find these in enclosed spaces.

It’s important to check the wiring’s insulation with regularity to ensure that it’s intact and that it hasn’t been chewed by rodents. The unfortunate part is that this isn’t something you can do for wiring behind walls. However, if you are undertaking any repairs, renovation or upgrades, take that as an opportunity to check the wiring for signs of rodent damage.

If you notice any flickering or experience power fluctuation in a certain room or part of the house, or if you find that a certain circuit breaker keeps tripping for no specific reason, get the system checked for rodent damage.

If you notice any signs of a rodent infestation, it’s important that you act without delay and take some steps to get rid of them. Buy some spring traps and rat poison from your local hardware store and set these at different places where you have seen rat droppings or heard noises. Even as you do this, it’s equally important that you also identify where these pests are entering your property from. Place the bait or poison at these points along your home’s exterior walls.

If you find the infestation to be too severe or if you aren’t too confident about using DIY rodent control measures, call a licensed electrician to inspect the wiring and check it thoroughly for damage. If they confirm that the damage has been caused by rats, it’s a good idea to call pest control professionals to handle the rodent control for you. They will provide solutions and give you advice on the steps you can take to prevent these pests from entering your property.

While the rodent control professionals will ensure that the rats are eliminated from your property, they will also advise you on how to seal all the possible rodent entry points in your home. Aside from very evident points such as doors and open windows, these pests can easily squeeze their way into the indoor spaces of your property through holes and large cracks. If the cracks are too small, they won’t shy from chewing their way in through the loose concrete of the walls.

If you have noticed any rats or mice on your property, do not hesitate to call us to get the wiring checked. We handle all types of commercial and residential electrical installation, repair and upgrade jobs. For more information, contact the AllRound Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263