A good number of the calls I get during an average day at work fall into two categories;   customers who call to have something installed in their electrical system, and customers who tried to install it themselves and are calling me to come and fix the mistakes they made.  There’s certainly nothing wrong with trying to perform basic electrical work yourself if you have a good grasp on proper electrical safety techniques and what you’re doing.  On the other hand, there’s nothing wrong with calling a top Dallas electrician to do the work for you either.  The best way to ensure the job is done right every time is to hire an honest, hardworking professional electrician who’ll stand behind his work.

Even tasks that can seem quite simple can be treacherous if you’re not sure what you’re doing.  This comes into play a lot when a homeowner is trying to perform a three-way switch installation.  It seems a lot easier to install than it really is; I generally recommend homeowners not attempt to install three-way switches without at least a electrician on the phone to walk you through the process.  Keep the following in mind:

There are tasks well suited for the do-it-yourself minded homeowner, though.  The easiest is wall outlet replacement, which is usually a very simple, straightforward procedure.   That doesn’t mean the haystack isn’t free of the odd needle that you can hurt yourself on, though.  Here are some of the more common problems I run into, along with some typical solutions or hints to keep them from happening to you: 

If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.

If you own one of the one million houses in the DFW area that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.

Your bathroom is a room that tends to be ignored when you think of sprucing up the house. It seems like a small space and it isn’t something that is regularly seen by visitors. However, you probably spend some time in there and would like it to be a little nicer. A new tub, vanity and sink are all great ways to make the room look more inviting, but they can be a little out of your price range. What if you could spruce up the bathroom for less than a couple hundred dollars? An electrician in Burbank can help you transform your bathroom with a few simple light changes. It is that easy and the crew at The Electric Connection would love to help you make it happen.

You can do so much more than the standard light in the center of the room and the typical large bulbs around the bathroom mirror. You can enhance the bathroom with soft lights that are great for those times you just want to soak in the tub and relax. A Burbank electrician can install a dimmer switch that will allow you to control the amount of light that floods your bathroom. You can go for a little or a lot.

Wall lights that resemble the old fashioned candles are beautiful and really add character to the bathroom. Recessed can lights are also a great option for the bathroom and shed a great deal of light without taking up any head space. Another feature many enjoy is the heat lamp installed by an electrician. Burbank residents will love stepping out of the shower into a heated room. It is also great for keeping the humidity down in the bathroom, which will go a long way to preserving the paint and woodwork. Give The Electric Connection a call today and schedule your bathroom lighting renovation.

There’s no question that LED lights are the best option for fleet vehicles—or any vehicle for that matter. They consume 90 percent less energy than incandescent bulbs and last about 42 times longer. Because fleet vehicles are constantly in motion, long-lasting LED lights can be of extreme benefit to trucking companies. A longer life span means dramatically lower maintenance and replacement costs as well as a reduction in downtime.

We have LED lights for Peterbilt, Kenworth, Freightliner, Volvo, International, Mack, and Western Star trucks as well as box trucks, tow trucks, dump trucks, and more. Options include LED tail lights, LED brake lights, LED marker lights, LED reverse lights, and LED clearance lights. These truck lights are available in a wide variety of styles, shapes, sizes, intensities, and connector types. Take a look through the categories below to see some of what’s available, and visit the links for complete product lists.

All of our LED truck lights meet DMV FMVSS 108 requirements and are protected by a lifetime warranty to guard against manufacturer defects and malfunctions. Mounting accessories are available under the accessories tab on each product page.

Options include multi-function combo boxes. Rear combination lights can be mounted vertically or horizontally on either side of box trucks, tow trucks, dump trucks, trailers, and flatbed trucks. The all-in-one lamps can be used as tail lights, brake lights, parking lights, turn signals, reverse lights, and running lights. Light heads can be rearranged for customized positioning.

Multi-function combo box lights have red and white LEDs and can be used as rear reflex reflectors, turn signal lights, hazard warning lights, reverse lights or backup lights, brake lights, and tail lights. Separate LEDs are positioned on the bottom of the box for license plate illumination.