Today, appliance timers are useful to turn on and off many items automatically around the home today. The timers control lights, coffee pots, sprinklers systems, and other small appliances. This can save on power costs, electricity, and water. The timers also make life more convenient for you. Let’s look at the various types of timers you can buy today to provide you with Energy Savings.

Savings

You can well imagine the savings in power, water or money you can have using these timers. Of course, the savings will vary from person to person depending on the habits practiced prior to using the timers.

Cost of Timers

The Appliance Timers range from just under $10 to over $100 depending on their functions. You buy the timer that best suits the job you need it for to get the right Energy Savings, do not buy a wall-mounted timer if you want to control your sprinklers for example. Do your research for the type of timer you need and then make your purchase accordingly.

When is it Time to Upgrade Your Electrical Work?

You can't see the electrical wiring in your home, but it’s integral to your day-to-day life. The electrical work behind your walls is responsible for lighting your home, powering your microwave and electric stove, running the air conditioning and so much more. So while your electrical work might be out of sight and out of mind, you'll definitely notice if something goes wrong. That's why you should prevent electrical problems before they start by evaluating your wiring and planning upgrades if your system turns out to be damaged, out-of-date, dangerous or otherwise not up to the standard required for modern homes.

Update Outdated or Dangerous Wiring

There are a number of reasons why your electrical work could be in need of an update. One of the most important, and potentially most expensive, is if you have an outdated wiring system running through your home. Homes built in the 1970s or earlier could have aluminum wiring, or even worse, knob and tube wiring – neither of which was designed to carry the amount of electricity necessary for today's households. If you have one of these systems in your home, you might be able to increase your home’s electrical capacity and improve its safety by replacing that infrastructure with modern copper wiring.

Even if you have a modern wiring system, problems like corrosion or damaged wiring may be undetected and worsening. That's a serious hazard hidden in your walls that you might not know about until it's too late. There could also be other dangers in your electrical work, like shoddy connections in your circuit box, too many outlets on a circuit, or a lack of proper grounding.

Look for Expert Guidance

If your electrical work seems like it's performing fine for now, that doesn’t mean there’s no reason to check it out. First and foremost, old wiring puts you at increased risk of an electric fire, which is a risk to both your property and your life. Furthermore, many home insurance agencies won't issue you coverage, or will charge increased premiums, if there is outdated electrical work. Old wiring also may not be up to your municipality's current local building code. Although existing homes are generally grandfathered into compliance if they don't meet new standards, you may be required to make updates to bring the system up to code if you perform any electrical work on your home in the future.

Properly evaluating the safety of a home electrical system is beyond the ability of most homeowners, let alone performing major upgrades like rewiring the home. If you have any doubts about the age or status of your home electrical work, call a qualified electrician today to advise you and make any necessary updates or repairs.

We can always find ways to save a few extra dollars, but sometimes it can be little difficult to pinpoint exactly where those savings are to be had. You may look at the budget over and over and still keep coming up with the same bottom line. An electrician in Santa Monica can help you discover a few ways you could cut your electric bill without dramatically changing your lifestyle. If you ever have any questions or concerns about these tips, you can call The Electric Connection to ask more questions.

1-Get rid of any of those remaining incandescent light bulbs. They are costing you money. You can shave 20 percent off your electric bill simply by relying on CFL and LED bulbs that are much more energy efficient. They tend to be a bit brighter as well.

2-Have a ceiling fan installed in a central room of your house. This will help circulate hot and cold air produced by your furnace or air conditioner. Ceiling fans run on a fraction of the electricity of a heating or air conditioning unit. It is a good idea to have the fan installed by someone familiar with Santa Monica electrical codes.

3-Ask every member of the household to shave off 2 minutes from their average shower time. This can save a lot of money on your electric bill by reducing the demand put on the hot water heater. You could also turn down the thermostat of the water heater by about 5 to 10 degrees and save even more money.

4-Unplug any appliances, computers and electronics when they are not in use. When you leave for the day or go to bed at night, unplugging your electronics can save you money on wasted phantom power.

Give The Electric Connection a call today to have your ceiling fan installed or to learn more about energy savings.

There is a very dangerous myth floating around, one which could actually result in severe injury and even death – “Electricity always follows the path of least resistance”. This is one of those myths that results from a general fact being blown way out of proportion.

Forget colleges and engineering schools, most high school students learn that electricity does behave this way, as a part of the basics of electricity and resistances. Worryingly, this myth isn’t just stated as a fact, it’s a commonly followed practice in many electrical circuit designs, especially when it comes to grounding.

Walk into any industrial plant that uses motors or pumps and you’ll find they’re all connected to ground rods. Ask anyone why that’s done and you’ll likely get the same response everywhere (even from the people in charge of the electrical maintenance) – It’s to eliminate the potential differences.