Your lights and appliances are working fine, so that means your wiring is too, right? Not so much. Seldom inspected after installation, the wiring in your home may need an update, especially if your home is more than 40 years old.

Installing sufficient wiring goes beyond safety. It also means enhancing your home’s functionality, reliability, and safety to keep up with today’s ever-increasing power needs. This applies not only to the installation of current electrical wiring, but wiring for your phone, Internet, cable, and more.

According to the NFPA (National Fire Prevention Association), faulty wiring is the leading cause for residential fires. The National Electric Code (NEC) updates electrical codes and standards for outlets and wiring every three years. Their mission is to keep up with technology designed to keep your home and family safe. Has the wiring in your home gotten any attention since the 2014 NEC code updates? Chances are it’s been far longer than that.   

Aluminum wiring used in the 60s and 70s, non-metallic wiring installed in the 40s and 50s, and knob and tube wiring in pre-1930s homes are well-known safety hazards, as are loose connections and frayed wires resulting from wear-and-tear.  

These are an enormous safety hazard – for you and your electronics. Without proper grounding, electrical excesses have nowhere to go but into your devices – or you – even if you have a surge protector. Reduce shock risks by rapidly addressing this sign of wiring that is way behind the times.

Identified by the “TEST” and “RESET” buttons on receptacles, GFCIs protect you from shock in high moisture areas. They are currently required in bathrooms, kitchens, laundry rooms, utility rooms, garages, spa/pool areas, unfinished crawlspaces/basements, and any areas outside of your home. If you are lacking these inexpensive, easy-to-install devices in any of these areas, you may be in for a shocking experience.

AFCIs prevent fire by acting as a circuit breaker, which disconnects in the event of a potentially dangerous arc. They are required in bedrooms in all 50 states, though some states require them in all circuits throughout the home.

Childproof outlets require equal pressure in all prongs simultaneously for electricity to flow. They cost pennies more than traditional outlets and are required in all newly built homes.

How many amps power your home? While 60 amps may have been sufficient in the past, today’s homes often need 100 to 200 amps to successfully operate the glut of large and technologically advanced appliances you use simultaneously, from mobile devices and flat screens to your refrigerator and air conditioner. Without an adequate power supply, you could end up damaging these sensitive items beyond repair.

Protect your family and home, ensuring the smooth, efficient operation of all things electrical while boosting the value of your property. Contact Mr. Electric® for an electrical safety and wiring inspection today.

You may not be aware, but you can have Top Dallas Electrician, ElectricMan Inc. can offer a way to avoid these charges, and Lower Electric Bills by making sure that you are using the least amount of electric company power as possible during peak times.

An Indoor Generator is a unique solution that allows you to store power, either from your power grid when it is cheaper, or utilizing other renewable energy sources, and decide when you want to use it. This highly intelligent equipment allows you to program when and where you get your electricity, providing incredible independence and capabilities for Lower Electric Bills.

Take this as an example.  One local electric company uses a general rule of enforcing peak usage fees between 4pm and 8pm, so programming your system to use power stored during off peak hours at these times will allow you to stop paying these peak usage fees, and only pay the standard rate for electricity during normal usage hours.  This is a far more effective solution, since it is impractical for most home owners to change their schedule and stop using power during these times.

Once you have an Indoor Generator system in place and programmed, the system will automatically switch to your stored power during the times that you have chosen, leaving you worry free about when you are using your electricity!

Do you need more space for a growing family? One of the tradeoffs to buying a larger home is having to pay more in utility costs for heating, cooling and other appliance use. However, advances in energy efficiency mean that you can offset some of that increased consumption. That means you save money and worry less about your energy use, even if you just bought the mansion you always dreamed of.

Bigger Houses and Bigger Households

We like our homes bigger. The average American home size has grown  20 percent since 1980, and we've been filling those homes with ever more electricity-dependent devices, like televisions, computers and household appliances. Fortunately, over 70 percent of the growth in household and building size has been offset by efficiency improvements, according to the Energy Information Administration.

Total energy use by U.S. households inched up each year between 1980 and 2009, the EIA Residential Energy Consumption Survey reports. That is because of various reasons, including more households, larger households and a trend toward bigger houses. However, consumption per square foot actually dropped by 37 percent during that time period -- and if it hadn't, the total increase would have been considerably higher.

Residential energy accounted for 21 percent of total U.S. consumption in 2012 so the cumulative savings are significant. The numbers are astronomical -- residential usage increased from 9.3 quadrillion BTUs (British thermal units) in 1980 to 10.2 quadrillion by 2012 -- and without additional efficiency measures the total would have increased by another 3.6 quadrillion BTUs.

Multifaceted Efficiency Efforts

There are numerous factors driving the efficiency revolution: Stricter consumer appliance standards, local building codes geared toward efficiency and federal tax credits, in addition to awareness outreach programs and labeling efforts like the federal Energy Star program have all contributed to the reduction in consumption per square foot.

If you want to save the most energy, smaller is always better when it comes to houses. There's less space to heat and less to cool. However, if you need the extra space, take heart knowing that technological and behavioral improvements mean that a large house doesn't gobble up nearly as much energy as you might expect.

For more ideas on how to decrease your consumption, ask a home services expert to evaluate your home. He or she can help you find new ways to save no matter the size of your home.

Call local Mister Sparky® for more energy efficiency tips and advice. We're always here to help!

When it comes to DIY jobs, electrical wiring is one thing that you should avoid. Most wiring or rewiring jobs are incredibly complex, and require the expertise of trained and licensed professional electricians, such as the members of our staff. You also don’t want to trust this job to an amateur or a general “handyman” as they most likely lack the necessary training to do the job right.

One of the most popular rewiring jobs people choose to proceed with is finishing their basement, which requires a good amount of rewiring throughout. Keep reading to learn more about what this type of job requires, and why you should only trust the professionals to complete it.

Even the smallest drip coming through your below-grade walls can create a problem. You’ll want to have the outside checked to ensure that the ground is graded away from your foundation, and also will want to check for cracks in your foundation walls and have that damage repaired if necessary.

Chances are, you don’t know the local building codes in your area. Many times, you’ll need to get building permits to make any electrical changes to this room of your home, as that room may need to be inspected before the job begins. Our electricians are aware of these rules and will take the necessary steps to ensure the job is done correctly.

A drop, or suspended, ceiling is one that is lower than the natural ceiling of your basement. This allows you to conceal any new plumbing that is put in, as well as electrical components such as wires. The good news is, there are plenty of attractive options for these types of ceilings. This also allows you to give your lighting a recess, which allows you more space for light fixtures.

As tempting as it may be to finish your entire basement, keeping the space housing your HVAC units and water heater clear, open, and unfinished is a good idea. That’s because these spaces have specific code requirements, plus your service professionals will need access for maintenance and repairs.