Crystal chandeliers have come a long way from the days as traditional, stately pieces only enjoyed in the most formal of spaces and positioned to impress guests in the dining room or the foyer. Crystal’s are found in various lighting applications of all shapes and sizes and their sparkling, elegant affect is energizing areas of the home from powder room and office to kitchen and bath.

More crystal means more cleaning, but it does not have to be too taxing. A few simple guidelines will help to keep your crystal chandeliers looking their best.

How to clean it

If you do not wish to remove the crystal components from the piece, you can use a spray. After the piece is sprayed, wipe off the solution with white cotton gloves. Crystal chandelier manufacturer Schonbek recommends a solution of one part isopropyl alcohol to three parts distilled water, while Waterford’’s chief lighting designer Billy Canning says hot soapy water will do the trick. Both agree that special cleaning formulas aren’’t needed.

“A real no-no in the area of cleaning chandeliers: …If the chandelier is adorned with a traditional polished gold finish or polished silver finish but it i’s not stainless steel, people will use these sprays that you can buy,” says Eileen Schonbek Beer, Creative Director for Schonbek Worldwide Lighting. “Basically, what the manufacturers say is you spray the chandelier and let the stuff drip off, that cleans the crystal. But in fact what it does is ruin the frames of the chandelier.”

If more aggressive cleaning is needed, the crystal parts will need to be removed from the frame. The crystals can then be hand-washed in soapy water, rinsed clean and dried with a cloth. Schonbek provides trim diagrams that detail reassembly of the chandelier.

For dusting between cleanings, Schonbek recommends using a feather duster, lambswool duster or a make-up brush.

How often to clean it

In general, crystal should be cleaned every two to six months. The frequency of cleaning required depends on where it is used and how easy it is to get to the piece.  According to Canning, extremely large pieces like 20-foot chandeliers can get away with being cleaned only once a year.

Since crystal lighting is being featured in virtually every room of the house these days, some pieces may need more frequent cleanings based on their location. Chandeliers used in kitchens will need more detailed cleaning due to oil and grease buildup, as well as dust sticking to the components due to moisture from sinks and stoves.

“The beauty of crystal, of course, is the prismatic refraction of the light passing through the crystal ornament,” says Beer. “So the minute it’s got any kind of residue of dust or even moisture — like in moist climates in Florida — the humidity will cause dust to adhere to the crystal and the salt in the air will kind of make it cloudy. So you actually have to clean crystal pretty regularly.”

Maintaining a regular cleaning schedule for crystal will always keep it sparkling. Yet if a piece is neglected, all it takes is a little extra effort with the methods listed above to make it shine like new.

“In my personal experience, I have been asked by many auction houses to identify Waterford products many times,” says Canning. “In most cases the difficulty with identification would have been that the chandelier was allowed to get dirty and the crystal would appear dull. But in all cases, when properly cleaned, they can look as good as the day they were bought.”

For the Chore-Challenged

For customers who aren’t ready to get into the nitty gritty of cleaning their crystal by hand, suggest the Da Vinci chandelier from the Geometrix collection by Schonbek. The crystals stay attached to a stainless steel frame that can be placed directly in the dishwasher. The Da Vinci is available in a 10-inch or 36-inch diameter. The only Da Vinci that will not make it to the dishwasher is the dramatic 5-foot model.

House wiring has undergone some dramatic changes in the last hundred years. What was once a relative luxury is now accessible (and even required) in just about everyone home in the country. That isn’t to say that all wiring is created and maintained equally, nor can we confidently say that any Des Moines home is safe for your family without giving it an on-site look.

If you’ve ever done a renovation or addition to your home, you know the nightmare that city and county building codes can be. It seems like someone at the city and county clerk’s office is sitting around all day dreaming up new ways to make your progress come to a screeching halt. While your home may not have been built anywhere near today’s level of code, it still works just fine. Right? Well, while some building codes may be a tad excessive, often they use technologies that the electricians of the past would love to have had a chance to use. While it may come as an inconvenience, remind yourself that the technology available today can keep you and your family safe in a number of impressive ways. From safer walls and greatly decreased risk of house fire to GFCI outlets that will automatically detect an unsafe circuit and trip the breaker, killing the power and potentially saving a life.

Homes built after the 1940s were made with far safer wiring than any before that. Hopefully, by now, any home that predates that period would be completely re-wired with a new electrical panel for the longevity of the home, but this is wishful thinking. Today, millions of homes across the country and a good deal in Des Moines are essentially ticking time bombs, putting all of those inside at risk for electrocution or worse. While we don’t want to spread fear heedlessly, if you are considering the purchase of, or currently own, an older home, then you should get in touch with a licensed electrician to check the safety of your electrical system. Hopefully, everything will look and respond correctly, but there could easily be opportunities for improving the safety of your home.

In addition to the much older homes in the Des Moines area, newer homes are home to their own problems. If you ever notice an outlet begin to stop working unexpectedly, hear a buzzing in the wall, or even feel a current running, then you should make calling an electrician your top priority. Thousands of homes catch fire every year due to poor or faulty wiring, making this nothing to wait on, ignore, or even attempt to DIY; electricians should handle any blatant problems with your house wiring to keep your home safe. With homes popping up in and around Des Moines, our electricians have seen a surprising number of errors that could have been avoided by a more attentive installation, but that is a blog for another time.

If you suspect that your home’s wiring may be facing some issues, it really isn’t worth delaying to get in touch with the local electricians at Electrical Gurus. We have the tools and experience necessary to quickly determine what, if anything, the problem may be and then implement a fix that will keep your family safe. We understand how important it is to find affordable, trustworthy service for your household, which is why we take each call seriously and employ only the best local electricians.

Legrand has been operating in the U.S. since 1984 and continues to bring its unique products to the American market. In addition to a luxury look, the brand offers many useful features and benefits to your home. From innovative gesture recognition to cross-compatibility with different bulb types,

Traditional lighting offers few options for adjusting light levels from room to room or regulating how much energy your lights use. Legrand addresses this problem with its innovative designs and technology, providing switches and dimmers with unprecedented options for control. Instead of flipping a switch, you might tap a console, press a rocker or toggle or simply wave your hand in front of a panel to turn lights on and off. Each fixture is designed to be as flush with the wall as possible, creating a clean look in any room.

Legrand dimmers come in six designs, each with its own combination of switch and dimmer controls: