If you have recently purchased a home or are in the home-buying process, you know there are a series of inspections that are required or recommended. One of those inspections may be an electrical inspection by a certified electrician in Glendale. The inspection is designed to give you an inside peek at what lies behind the walls of a home. If you have lived in your home for some time and have never had an electrical inspection, it may be a good idea to have one done. The team at The Electric Connection can help you get that scheduled.

If you have never seen an electrical inspection or are unsure as to what they encompass, this information will help you understand a bit more.

A Glendale electrician will inspect the electric panel, the breakers and look at the wiring that is visible in the panel. The electrician may also remove a light switch cover plate and have a look to see what the wiring looks like. If you have any exposed wiring in the attic or basement, make sure you point it out for the electrician. Glendale homeowners who have exposed wiring will want to have it taken care.

Once the inspection is complete, the electrician will write up a report about the findings. If there are things that are hazardous, they will be outlined and explained. Electric hazards should be resolved as soon as possible. Your electrician will also note things that are not necessarily hazardous yet, but should be taken care of at your earliest convenience. Any code violations will be pointed out. In some cases, failure to have a house brought up to code leaves you vulnerable should there be a fire or injury caused by wiring that is not up to code.

Give The Electric Connection a call today and schedule your electrical inspection whether you are buying, selling or plan on staying in your house for years to come.

By Hannah Haseloff

Candles can be a homeowner’s best friend, especially around the holidays. They can add style to a room, create mood lighting, and make a house smell delicious.  They are also useful to have during those emergency power outages and can help you find your way in the dark.  With the introduction of electric candles, candles are increasing in popularity. But what is the difference? Are electric candles safer than traditional ones? Which is better? Maybe our guide to electric candles can help you to decide for yourself!

One drawback to traditional candles is the fire hazard that comes with having an open flame. Knocking over a candle or placing flammable objects too close can have disastrous effects. Between 2007 and 2011, there were over 10,630 started by candles in the home. Although electric candles present much less of a fire hazard, they can still be dangerous. Small children can easily remove the button sized batteries from the candles and swallow them. It is a good idea to tape over the battery access panel and keep the candles out of reach.

Candles are great for setting mood lighting and traditional ceremonies. In an emergency, candles can be used as a source of light. Traditional candles produce more light than electric ones; however, electric candles still provide a good source of light.

Both electric and traditional candles can be used as a calming agent using aromatherapy.

Electric candles can be placed on a timer and can be set to turn on automatically.

One nice thing about electric candles is that they won’t melt or ever lose their shape. Traditional candles can create a mess when they melt or be rendered useless because of their distorted shape.

Electric candles not only have a variety of fragrances, but can also serve as an insect repellent. For people who love candles, but do not love the scent, unscented electric candles are also available.

One advantage of electric candles is that they come in more variety than traditional candles. Another advantage is that electric candles be placed in areas were traditional candles could not because of the fire hazard. For more candle styling tips, visit My Home Life Magazine Pinterest board.

Source:

One of the biggest and best advancements to hit modern U.S. homes today is the advent of the home automation system. These systems allow you to have control over your house at your fingertips. There’s a combination of hardware, software, and appliance-based interfaces that goes into creating this system, and therefore it’s only natural that something can eventually go wrong.

Even the greatest technology can have bugs that will need to be worked out. If you have problems with your home automation system, the best thing you can do is give your professional electricians a call to help repair the damage and get you back in control. However it may also be helpful to understand what some of the most common issues are, and how we troubleshoot them.

Naturally, when you go to integrate home automation into your home, you are going to have some home systems—if not all—that are older and have been with the home for a awhile. Integrating these older electronic systems with the new one of your home automation system can be challenging, and it may take some time to understand where the integration problems exist.

This type of problem usually presents as a non-response from whatever device or appliance you are attempting to use, or limited functionality from that system. Your professional electrician will know how to repair these issues as they have experience with these types of issues.

Your home automation system is completely interconnected and connected to your home’s electrical system, and therefore depends heavily on the wiring of your electrical system. So if you experience any type of electrical short, poor wiring, or faulty wiring, then there can be a malfunction of your system. Your professional electrician will look at the electrical layout for your home automation system—which can be complex—to determine the exact cause of the problem.

Sometimes due to unforeseen circumstances your home automation system may suffer from physical damage. When that occurs, a professional will be able to carefully inspect the system and repair or replace the components that were damaged to obtain full functionality of your home automation system.

This problem is similar to the heating appliance issue we started with.  Overloaded outlets are more than just a circuit-tripping annoyance, they can also become a danger quickly!  If you’re electrical panel is doing its job properly, the circuit breaker will trip before there’s a problem, but relying on a safety measure is not a safe practice.

Overloaded outlets are simply circuits that have too many things plugged into them.  This can happen by:

All of these practices can overload your outlets by putting too much demand on the circuit.  In a best case scenario, the circuit breaker trips.  The worst case leads to excess heat at the outlet, melting plugs and sockets or excess heat on the circuit which melts insulation from wiring in the walls, leading to a house fire.

Of course, even if you follow all of these protections, things can happen that are outside of your control.  That’s when your best defense is a strong safety net.  Early detection and warning for house fires is the best way to survive in an emergency.  The sooner you’re aware that there is a fire, the higher your likelihood of survival.  For the best defense:

Summer’s coming, which means it’s almost time to fire up the air conditioner if you want to stay comfortable in your home. But running an air conditioner can be expensive! Around this time, many people start looking for ways to save cooling costs. Some of the most popular methods include:

Other, more complicated ways people save money on their energy bills include adding insulation and planting trees. And while those are definitely effective and will save you money in the long term, there is an even easier way to save money on your energy bills that you might not have thought of—installing a ceiling fan!

You probably already know that warm air rises and cool air sinks. During the summer, running your ceiling fan counterclockwise will push air down, moving the cool air around and creating a breeze that will help you feel cooler, even if you turn the thermostat up a few degrees.  Some ceiling fans can make a room feel up to eight degrees cooler! During the summer, every degree you turn your thermostat up can save you from 3-5 percent on your cooling bills, so every bit helps.

Having multiple fans running at once can help even more by improving airflow through your entire home, so install them wherever you need them! Ceiling fans tend to be inexpensive and the comfort and savings they provide can’t be beat.

Don’t forget: running your air conditioner doesn’t actually cool your home—it only makes you ­feel­ cooler. Therefore, you should always shut the fan off before you leave the room!

You may already know that ceiling fans can help you cool off in the summer, but did you know they can also help keep you warmer in the winter? It’s true! Flip the switch on your ceiling fan so your fan will rotate clockwise. This creates a gentle updraft that pushes warm air up against the ceiling and down along the walls to the bottom of the room, making it feel warmer and helping you save up to 15 percent on your heating bills!

The same things apply to fans in the winter as the summer—multiple fans will increase the effect, but you should only run them when your home is occupied.

Ceiling fans are a great investment for anyone looking to save money and stay more comfortable in their homes all year long. If you’re looking for ceiling fan installation in Maryland, Virginia, or Washington, DC, call Kolb Electric today!