What’s all the buzz about? Through smart-tech and general technology improvements, modern homes are getting safer and safer every year, which we can all be happy about. But that doesn’t mean we as homeowners should let our guard down! Electrical safety is still a big, big deal, and tons of fires are reported every year due to electrical failures or misuse. Some of the causes are even really odd, or something you might not expect. Do you know all of the dangers potentially lurking in your home?

At Kolb Electric, your safety and the electrical safety of your home is our absolute priority in all cases. Superior electrical service may be our pride, but safety will always come first and foremost! Today we’re here to talk about some hidden home threats, and what you can do to avoid them.

Looking for electrical services for your Bethesda home? Contact Kolb Electric today!

We all know that there are risks with say, outlets, or a damaged appliance. But there are plenty of problems that can come right out of the woodwork (sometimes literally!). Be aware of these potential problems, and prepare your home accordingly:

Need some trustworthy service from a certified electrician to shore up the defenses in your Maryland home? Contact Kolb Electric today! We’ve been putting the needs of our consumers first and foremost for nearly a century, and our experts are always ready to assist!

Holiday lighting products have evolved into a much safer product over the years.  With the development of properly sized wires and fuses and LED lighting to reduce the consumption load and the heat the lamps produce, holiday lighting has never been more safe.  In the past people would take the old C style lamps and hook one string of lights into the other.  Often overloading one the strings or the weakest link.  This overload would often melt wires, create sparks, and in some cases even cause a fire.  The manufactures and improved safety standards and testing, help reduce to the chance of an overload by installing a fuse at the starter end or male end of the light string.  This fuse would blow or trip when the load became greater than the fuse capacity, which would then project the wire from the overload.  It is always recommended to install lights that are interconnected (one light string plugged into the other) to manufacture specifications as listed by there instructions.

LED or light emitting diodes have not only made holiday lighting more efficient but even safer.  The old style C7 and C9 lamps could reach temperatures of up to 350 degrees.  The hot lamp if rested against wood or dry Christmas tree, has the potential to ignite the material from the heat the lamp produces and cause a fire.  With LED’s to replace the old style incandescent lamps the chance of fire from heat is almost non existing.  However, it is still possible to cause a fire from electrical spark or short.  These sparks or shorts produce heat much greater and can easily ignite flammable material.  Sparks or shorts are often caused by frayed or damaged insulation on the electrical wires and also loose connections.  It is important to inspect your holiday lighting for damaged or loose components and replace when needed.  Be sure not to use any damaged equipment and immediately discard them to eliminate the chance of future use.

A common mistake made people make with holiday lighting is to plug to many holiday lights into each other.  UL listed holiday lighting and cord splitters are tested to specific tolerances and should only be installed to manufactures specifications.  The easiest location to find the manufactures is specifications is to look at the tag on the cord most commonly found near the male end of the cord or light string.

If enough standard wall sockets are not present and you must plug in multiple cords, it is highly recommended to install a plug switch with a built in overload device to reduce the risk of overload.  The built in overload should not be mistaken for a surge protection device.  A surge protector reduces or eliminates the excess voltage going to the device plugged into itself.  Where an overload device will shut off power at the point of installation if to much power is being drawn through it.

On many new homes we will install plug ins located in the soffit or eve to reduce or eliminate drop cords for holiday lighting.  These soffit plugs are installed on a special heavier 20 amp circuit and often include a convenience switch located inside the home to shut the lights on / off as needed.  The special circuit makes sure your holiday lighting is not installed on regular interior circuits so the chance of variable loads and overloads are dramatically reduced.

Permanent holiday lighting can be installed by a licensed electrician.  The most common type of permanent holiday lighting is LED strip lighting.  These are can be installed on the under side of eves or soffits for a permanent installation.  Depending on the type of LED holiday lighting you choose you may even have the option to change the colors of the lights with a push of a button.  This allows the holiday lighting to be used for many occasions throughout the year.  You can call today or schedule online to have a lighting specialist come to your home or business and provide you with a written no obligation quote.

Any room, area, facility, or outdoors space you need to illuminate should be done so with quality lighting. The benefits of quality lights far surpass going cheap on your lighting fixtures just to save a few dollars. The importance of quality such as metal halide have a rather short lifespan compared to it’s competing technology, LED. LED gymnasium lights, and just LED lighting in general, prove to have a much longer lifespan. This lifespan can be 2-3 and sometimes even 4 times longer than other light sources such as metal halide.

This can allow for less frequent purchasing of new lights to replace old and burnt out ones, which will allow you to better realize a better ROI by investing in LED over metal halide or other similar technologies. This also indirectly reduces your maintenance costs by lowering the amount of time you have to pay someone to switch out burnt out bulbs. This can allow you to reduce your maintenance costs related to your lighting for gym areas by 2-3 times, which will just add on to the benefits that LED can bring to your facility.

While saving money through lighting efficiency, longer life spans, and less maintenance costs is great; it shouldn’t be achieved while decreasing the quality of light produced in your facility by your lighting system. Luckily, LED products allow for proper lighting in a wide range of applications, even your gymnasium. This allows you to create exceptionally safe areas that will keep visitors aware of all there surroundings.

Did you know that LED lights that are efficient called the DLC (DesignLights Consortium). This is an organization that qualifies commercial lighting products based on it’s quality and efficiency. There are both standard and premium qualifications, and premium typically yields higher rebates and thus higher ROI over standard qualified products. Although both are still good and are always recommended for any industrial lighting purchase because being qualified is better than not at all. Without being qualified, we recommend you stay far away from any light that isn’t DLC qualified for various reasons including it not being verified to be a “good” product.

If it isn’t clear by now, the answer is obvious. LED can, will, and should be bringing your gymnasium area all of the benefits that the technology offers.

From efficient, to quality and rebates; there is almost no reason why you should choose other gym lighting technologies over LED gym lights.

More importantly regarding safety of all visitors; LEDs will ensure your areas are properly illuminated with a wealthy amount of light, and won’t be under lit. Also since LEDs will never buzz nor flicker, you will never face that annoying issue that other technologies will do, not even near the end of it’s lifespan. And as you know, buzzing or flickering lights can cause annoyance and less focus, which is never good for a gymnasium environment.

Conclusion

There you have it, what quality LED lights can and will do for your gym. LEDs are also a great option for all of your other lighting needs, such as school rooms, hallways, write in to one of our professionals for some answers.

7.  Convert the extra closet into a sewing/hobby center.  Install a custom-cut countertop and a little task light… “Viola!” You are done.

8.  Or, maybe you are not done….Why not literally “Knock Her Socks Off” and build her a bigger closet?!

Whether you are building a new closet or updating an existing one, there are specific rules for lighting an enclosed closet space.  The National Fire Protection Association’s National Electrical Code (NEC) sets standards for safety:

Because closets contain flammable material with limited ventilation, strict building codes dictate that specified lighting fixtures must be installed 18” to 24” from walls depending upon which lamp source is being used.  Surface mounted and recessed fixtures must allow for 6”-12” of clearance from any storage space, such as shelving or clothing rods.

♦Of course,these standards are not a problem for Mariah Carey whose closet is as big as a bedroom!

One of the latest changes to the NEC code is the addition of LED (light-emitting diode) fixtures.  LED lighting may cost a bit more, but energy-savings, greater illumination and safety features will prove to be well worth the investment over time.  The quality and adaptability of newer LED lighting makes it an excellent choice for closets and dressing rooms.

9.  Don’t leave Mom in the dark!  Create a cozy corner with a new den floor lamp so she may relax and read, while you watch the ball game! Try a lamp with full-spectrum lighting to elevate her spirits.

10.  Reward yourself:  Clean out the garage and carve out a space for a workshop that is all your own!

People are investing more into floor covering, cabinetry and shelving to make the most of their garage space.    Fluorescent fixtures, track lighting and simple portable lamps are making their way into upgraded organized garage systems.

There’s something exciting about making a large purchase: the rush of buying, the nagging fear that you can’t afford it, the anticipation of it making your life better or easier.  This feeling is especially true when it comes to a new appliance; it’s an investment in saving you time and effort. What if the investment you just made turns out to be a dud because of overlooking the impact it would have on your electrical system?

A lot of the work of an appliance happens within the machine, we tend to not think about the fact that an appliance is really a very complicated electrical machine. In addition, we ignore that they require a lot of electricity to operate. They can really strain your electrical system. This is especially true of modern appliances; it seems like they’ve found a way to computerize everything, and that only makes the power needs of an appliance grow even when they are “Energy Star” rated. Installation of these complex modern appliances seem as easy; some almost seem like they only need to be plugged in and forgotten. This approach neglects the fact that there are important things to keep in mind with regards to appliance installations that can cause serious problems for you down the line.

Obviously, you don’t always need to call an electrician whenever you install an appliance. With that being said, there’s nothing wrong with doing so if you’re not sure what you’re doing. The Best Dallas Electrician you can hire can help you avoid a lot of potential hazards and costs down the line. If you’re still planning on installing your new appliance yourself, keep in mind the following electrical safety do’s and don’ts: