Most electrical problems in your house will more often than not require an electrician to fix them, but sometimes, if you have some time on your hands and the right tools, there are certain things you may want to tackle yourself. In this post, we will look at replacing a junction box and fixing backstabbed wires.

Replacing a Junction Box Cover

Your existing junction box should already meet the required National Electrical codes of standards, but if you happen to find one in your home that is missing a cover, it is best to have it replaced immediately. Because the splices where wires are connected together are housed in a junction box, they could end up being inadvertently damaged and become a fire or shock hazard. If this has already happened, you may want to ask a qualified electrician for help.

Fixing this is as simple as using the original cover and some screws, or if it is lost or damaged, buying a new one for a few cents at your local hardware store and installing it with the accompanying screws.

Backstabbed Wires

Backstabbed wires occur when wires in newer switches and receptacles are pushed into the back. These are more likely to come loose than those that are held in place by screws. A wire that comes loose will most likely cause the terminal to stop working, but in some cases, it may even cause an electrical fire.

Carry out a check to see whether there are any switches with backstabbed wires. If you find any, release the wires and then attach them to the appropriate screw terminals on the switch. If you do not feel comfortable doing this yourself, your electrician should be able fix this for you pretty quickly.

Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.

You have probably heard about electrical safety since the time you can remember. However, because we are so used to using electricity and having it around us all the time, we rarely stop to really think about it. Complacency can be dangerous. It is important to take a step back and really look at your home and surroundings. Are there any electrical hazards looming? Are you practicing safe electrical habits? An electrician in Burbank has some quick tips for you to practice. You can always call The Electric Connection to learn more and ask more in depth questions about electrical safety.

1-Only have electrical work in your home completed by a qualified Burbank electrician.

2-Plug large appliances like refrigerator, oven and microwave directly into an outlet.

3-Use GFCI outlets in the kitchen and bathroom area. These should be installed by an electrician. Burbank residents can protect themselves from electric shock in areas where water is present with this type of outlet.

4-Don’t make extension cords a permanent solution. If you need more outlets, have some installed by an electrician.

5-Don’t plug more than one heat producing appliance i.e. toaster, space heater, coffee maker, into an outlet at the same time.

6-Have all remodel work completed by an electrician.

7-If you are buying a new home, have it inspected by an electrician first.

8-Only use lightbulbs that are appropriate for a light fixture.

9-Ensure electrical cords are not damaged or at risk of being damaged from being run across walkways or smashed in doors.

10-If you experience a tingling feeling or small jolt when plugging in an appliance, stop! Don’t use the appliance until you can have the outlet inspected.

These are quick, basic tips that can actually prevent serious injury. If you have any questions or need an electrician to complete some work or an electrical inspection, give The Electric Connection a call today.

You aren’t blinking without realizing it; you aren’t sleepy or imagining things. Your eyes aren’t tricking you—your lights are flickering. There are a few different reasons the lights in your home might be flickering, so read on to figure out what your problem is, as well as whether it’s a simple fix, or cause to contact a professional here at Hoffman Electrical!

Our team has been providing top-class electrical services to Tampa and the surrounding areas for nearly three decades. Our team has the skill and experience needed to suss out your flickering light problems, guaranteed.