When you think about your personal pool or hot tub, what comes to mind? Probably parties, relaxing evenings, or family fun, right? Electrical shock, property loss, and other dangers are probably the furthest from your mind, and that’s how it should be! That is, if you’re sure the wiring for your pool and or hot tub are in perfect working order.

Halloween is no doubt one of the most festive times of the year and decorating for the season is a fun and cherished pastime enjoyed by many families. Unfortunately, as almost all Electrical Companies In Dallas will tell you, Halloween can also be one of the most dangerous holidays of the year. The electrical experts at Dallas Electrician, ElectricMan Inc. would like for you and your family to enjoy the ghoulish festivities while practicing electrical safety, so here are a few tips for making the most out of decorating for this exciting time of year.

The Hazards of Halloween Decor

When people talk about Halloween decorations, they’re often thinking about lots of lights combined with smoke machines, spiderwebs and paper decorations, all of which can be cheaply made. The down side of these homemade special effects is that many of these decorations are made of highly flammable material which, if left unattended and in close proximity to electrical lighting, can be anything but fun.

Another problem that often arises from Halloween decorating comes from using electrical lighting and components with electrical wiring that has become cracked and damaged over time. Any cracks in the insulation or damage to the wires can prove frightening and sometimes even deadly. Furthermore, heavy usage of lighting and decorations that require electricity can put a strain on extension cords, power strips and electrical outlets in your home, straining your home’s circuits.

Tips for Safe Decorating

You don’t have to leave the Halloween spirit behind to celebrate safely. Follow these easy-to-remember safety tips when Halloween decorating with your family for the ultimate ghoulish celebration:

Electrical Companies In Dallas That You Can Trust

In over 27 years of electrical experience, ElectricMan Inc. has seen too many families in danger as a result of careless and unnecessary oversights in the use of lighting and electronics. With a little care, a little caution, mixed in with some common sense, your family can enjoy the candy and the costumes and not have to be worried about electrical fires.

For more information on electrical safety and how you can protect your home and your family, or if you need local Electrical Companies In Dallas to help you with any electrical issues you may have,  call ElectricMan Inc. at 972-792-7270 or read more of the wealth of information at the ElectricMan Blog!

When you’re purchasing LED strip lights, there are numerous details and specifications upon which to base your decision. Color, length, and intensity are some of the major deciding factors, but there are many unthought-of product aspects that further customize light strips and what they’ll require when it’s time to install them. For example, a decision between 24-volt strip lights could change the products needed for your project.

While it depends on a light strip’s current draw, LED type, and number of LEDs, 24-volt LED strip lights tend to have longer maximum runs than 12-volt strips. This is because higher voltage carries more power. All strips have a maximum run, which is the length of continuous strip that can be powered without experiencing voltage drop. Voltage drop happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). If a run of strip is too long, reduced energy across the strip will lessen its intensity near the end.

Because they can handle more power, many 24-volt LED strip lights tend to have brighter LEDs, dual-row LED configurations, or single-row configurations of more LEDs. In these instances, maximum run might be the same as a 12-volt strip. However, keep in mind that these are more powerful strips with more LEDs or higher LED intensities. An identical 12-volt LED strip light would have a shorter maximum run.

Make sure to check any light strip’s specifications or description for its maximum run.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Pay as you go electricity plans allow consumers to pay for their electricity in advance. The plan, which uses prepayment meters, helps consumers to monitor and control the way they use electricity. This saves on energy costs.

Keypad based prepaid meters: This meter has a keypad to input the electricity token number. Consumers purchase the credit using a variety of methods. These include visiting the agent, paying through banks or mobile payments in some countries.

Key meter: Consumer uses an electronic key loaded with the tariff information and credit.

One way card system: Uses a disposable card. The user purchases power with a reloadable debit card. The loaded card is then passed near the meter, which has an in-built card reader.

Two-way card systems: Uses a smart card and the meters have a real-time, two-way communication capability. It is one of the most secure, but more complex and expensive methods to implement.

These allow consumers to interact with their meters and query balances using their mobile phones by sending an SMS to a monitoring system. In addition, the user is able to track electricity use by the hour, day, month or annually using the phone or online access.

These smart prepaid meters offer easier top up options. They include online payments or by text, as well as scheduled and auto top-ups.

When using a prepaid meter, the customer must keep track of the remaining credits and replenish to avoid disconnection.

Ensure there is enough credit when going away for long periods. The meter will continue collecting the standing charges even when on no load. Consumers should ensure they have enough credit to last until they return.

Some crooks will take advantage of the consumer’s lack of knowledge and offer them cheaper credits than those bought directly from the utility company. For example, they will sell their credits at half price. This is more common with Key Prepaid Meters and the crooks will usually have master Keys, which they use to top off the consumer’s meter.

If the energy company finds out, the consumer ends up paying twice for their electricity; first to the crook, and then to the energy company.

To avoid falling victim: