This week, I participated in a weekly twitter chat calledTweetChat, with whom I have no affiliation but do use) Wednesdays at 2 p.m. EST and use the hashtag #KBTribeChat. Information about the interesting conversation. One of the questions was about using lighting to personal kitchens and baths. Of course, this got me very excited. I inadvertently learned that Twitter is great if you have a little that you kind of want to say. It’s terrible when you have a LOT that you REALLY want to say. That 140 character limit becomes a cruel, tyrannical constraint. So I thought to myself: You’ll just have to wait until you get back home to the blog, where you can write actual paragraphs, to answer this question. Ahhh. It feels good now to have a little room to stretch out.

So, how can you use lighting to personalize a space? Here are 4 things to keep in mind.

1) Fixture and Light Source

If your heater is not well-maintained, then you are at a much higher risk of encountering serious operational problems than you otherwise would be. When you have a professional heating technician inspect and meticulously tune up your home heating system, every component in that system will be working at peak performance levels. This not only helps to ensure that any minor issues are resolved before they can cause serious trouble, but also that any developing issues are caught early on.

Another great benefit of routine heating maintenance is the fact that you’ll be able to heat your home in an efficient manner. If your heater is not functioning properly in every way, then it is going to have to work harder than it should have to in order to heat your home. This will result in increased heating costs.

Not only will you likely be paying too much to heat your home, should you fail to schedule routine heating maintenance, but it is also very likely that you’ll be met with a subpar performance from your home heating system. If you want to pay as little as possible for the best performance possible from your heating system, just pick up the phone and dial our number. Great heating maintenance is just a phone call away.

Juggling the seemingly endless myriad of accessories, appliances and tools that have become commonplace in modern homes can sure be a hassle. Many homeowners find themselves routinely swapping plugs, or using devices like a power strip. While these can suffice in many situations, and offer a (relatively) effective solution, many make the mistake of relying on a power strip too much.

The only thing Kolb Electric takes more seriously than perfect service is safety! We don’t want to see you caught up in an electrical emergency, and to make sure you don’t we’ve built a short list of power strip safety tips. We also have some alternative, and overall superior, suggestions as well!

When deciding to use a power strip, keep these points in mind:

As we said, power strips are fine. In moderation, and as long as you observe proper power strip safety. But there’s a better solution! You aren’t simply stuck with however many outlets are currently installed in your home. Additional outlets can provide a safe, dependable and long-term solution to your electricity needs! The process is quick and simple in the hands of a professional, and will have you set to handle all of our modern lifestyles.

No matter what you require for your home, the experts at Kolb can provide the electrical access you need! We’ve been handling electricity, wiring and appliances for years, providing our consumers with only the absolute best in service, skill and technology. Contact Kolb today to learn more about our services, or to set an appointment!

Crystal chandeliers have come a long way from the days as traditional, stately pieces only enjoyed in the most formal of spaces and positioned to impress guests in the dining room or the foyer. Crystal’s are found in various lighting applications of all shapes and sizes and their sparkling, elegant affect is energizing areas of the home from powder room and office to kitchen and bath.

More crystal means more cleaning, but it does not have to be too taxing. A few simple guidelines will help to keep your crystal chandeliers looking their best.

How to clean it

If you do not wish to remove the crystal components from the piece, you can use a spray. After the piece is sprayed, wipe off the solution with white cotton gloves. Crystal chandelier manufacturer Schonbek recommends a solution of one part isopropyl alcohol to three parts distilled water, while Waterford’’s chief lighting designer Billy Canning says hot soapy water will do the trick. Both agree that special cleaning formulas aren’’t needed.

“A real no-no in the area of cleaning chandeliers: …If the chandelier is adorned with a traditional polished gold finish or polished silver finish but it i’s not stainless steel, people will use these sprays that you can buy,” says Eileen Schonbek Beer, Creative Director for Schonbek Worldwide Lighting. “Basically, what the manufacturers say is you spray the chandelier and let the stuff drip off, that cleans the crystal. But in fact what it does is ruin the frames of the chandelier.”

If more aggressive cleaning is needed, the crystal parts will need to be removed from the frame. The crystals can then be hand-washed in soapy water, rinsed clean and dried with a cloth. Schonbek provides trim diagrams that detail reassembly of the chandelier.

For dusting between cleanings, Schonbek recommends using a feather duster, lambswool duster or a make-up brush.

How often to clean it

In general, crystal should be cleaned every two to six months. The frequency of cleaning required depends on where it is used and how easy it is to get to the piece.  According to Canning, extremely large pieces like 20-foot chandeliers can get away with being cleaned only once a year.

Since crystal lighting is being featured in virtually every room of the house these days, some pieces may need more frequent cleanings based on their location. Chandeliers used in kitchens will need more detailed cleaning due to oil and grease buildup, as well as dust sticking to the components due to moisture from sinks and stoves.

“The beauty of crystal, of course, is the prismatic refraction of the light passing through the crystal ornament,” says Beer. “So the minute it’s got any kind of residue of dust or even moisture — like in moist climates in Florida — the humidity will cause dust to adhere to the crystal and the salt in the air will kind of make it cloudy. So you actually have to clean crystal pretty regularly.”

Maintaining a regular cleaning schedule for crystal will always keep it sparkling. Yet if a piece is neglected, all it takes is a little extra effort with the methods listed above to make it shine like new.

“In my personal experience, I have been asked by many auction houses to identify Waterford products many times,” says Canning. “In most cases the difficulty with identification would have been that the chandelier was allowed to get dirty and the crystal would appear dull. But in all cases, when properly cleaned, they can look as good as the day they were bought.”

For the Chore-Challenged

For customers who aren’t ready to get into the nitty gritty of cleaning their crystal by hand, suggest the Da Vinci chandelier from the Geometrix collection by Schonbek. The crystals stay attached to a stainless steel frame that can be placed directly in the dishwasher. The Da Vinci is available in a 10-inch or 36-inch diameter. The only Da Vinci that will not make it to the dishwasher is the dramatic 5-foot model.

The fuse box is a metal box installed somewhere on the inside or outside of the home. It is installed by an electrician and has a hinged cover to keep the fuses protected. Most homes built before 1960 will have a fuse box, those built after have a circuit breaker box.

This box controls the electrical flow to your home. In the event of an overload, the fuse attached to that circuit will blow. This will cut power to every device on that circuit in the house. Most boxes have a main switch that will control power to the entire house.

There are three important things that you need to know about your box. You need to know where it is, what type of fuses your box uses, and if your main switch works properly. You should test your main switch at least three times annually to make sure it works correctly.

The inside of your box has several threaded spaces that resemble light sockets. These are called Edison sockets, and your fuses screw into them. Some fuses have an adapter called a rejection base snapped inside of them. The rejection base will only allow an S type fuses to be placed in that spot, whereas the larger T type fuses are screwed into the non-adapted sockets.

The most common fuses in homes nowadays are fuse types SL and TL. The SL fuse is a fuse with a rejection base already installed. The TL type fuse is a fuse with a regular Edison base. These work well for home use because they are designed to handle momentary power overloads caused by turning on household appliances.

When you blow a fuse, you need to unplug everything connected to that circuit. Go to the box and place a dry rubber mat on the floor to stand on to create insulation for your body. Put on a pair of thick leather gloves to avoid possible electrocution, open the hinged door and turn off the main switch for the house.

Using a flashlight, examine the top of each fuse. The top is made of glass. A blown fuse will either have the metal wire broken in pieces inside the glass, or glass that appears cloudy so you can’t see in. Remove this fuse, being careful not to touch the metal parts with your bare hands. Replace this with a fuse of matching amps. Turn the main power switch back on.

If you don’t want to mess with fuses, you can install mini breakers into the box. These turn each fuse into its own circuit breaker with a button on top. When a fuse blows, push the button to reset it. Your other option is to have an electrician replace your box with a modern circuit breaker.