If you are doing work on your yard over the weekend, you can now get away with doing everything using only electricity. Lawnmowers, pressure washers, and other tools that commonly used gas can now be purchased in models powered by electricity. If you are using these electrical powered tools you need to ensure that you have electrical coverage around your home to plug them in. Here are some tips for having outdoor GFCI outlets installed in your home’s exterior.

Most homes come standard with a couple of outdoors outlets. Sometimes this is not enough and you will be restricted because the cable for your lawnmower or pressure washer can’t reach around the side of the home or to the back of your yard. When preparing to have an outdoor GFCI outlet installed, measure the length of your cables and the maximum distance you will need to go. You can then create the radius of coverage you will need and pin point the correct locations for the outlets. If you do not choose the optimal location you could end up installing more outlets then you need and will have to unplug during tasks to move outlets. This is inconvenient, so lets do it efficiently!

With a ground fault circuit interrupter (GFCI), the outlet can detect if there a problem in the circuit such as contact with water or a person, and then the circuit will shut off. This is especially important outside, as the outlet is more susceptible to water, from rain and snow, car washing, and interaction from animals and children. It is also wise to have covers installed overtop of the outlet as well. This adds an extra layer of protection. The covers will need to be manually opened by yourself before use and prevent unwanted interaction.

As we usually recommend, double check that your existing wires and circuits can handle the additional outlets. The tools and equipment that make use of these outlets can demand a lot of power and if the outlet is installed on circuit that is already heavily loaded, you will be experiencing trips and electrical hazards to your home. An Expert Electrician will be able to identify the proper circuits to have the outlets installed on.

Using electricity offers convenience and efficiency. Make the most of it and be safe by having a professional, certified electrician install outdoor GFCI outlets on your home.

Summer heat is upon us, so what better time to kick off our annual ceiling fan give away with a free professional licensed electrician to install it!  What is the catch?  You must like our page on Facebook and share our post.  Our electricians want to reward you with a ceiling fan for being our fan!  We will come out and install the fan in the lucky winners house.  We wont try to sell you anything and you wont owe us a dime!

To qualify you must like and be a fan of our Facebook page, share our post and live within 25 miles of one of our electricians in Des Moines or within 25 miles of our Clive office.  For free installation there must be wiring already in place where you want the fan installed.  If there is no wiring already there no problem the fan is still yours!  Or we can install in another room for you free of charge.  We will pick one lucky winner on August 28th, 2015.  Our winner will be announced via our Facebook page.

One of our friendly electricians will come out to install the ceiling fan for you.  We will remove your current fan or replace your light with your new free fan!

Well lets not forget to mention the obvious.  It’s free!  A ceiling fan can help reduce your heating and cooling cost.  In the summer your fan needs to rotate in a counter clockwise direction.  This will blow the air straight down and produce that cool summer breeze you have been looking for.  In the winter you want to turn your fan on so that it rotates in a clockwise direction.  This will help push the warm air trapped on the ceiling down.