Halloween is no doubt one of the most festive times of the year and decorating for the season is a fun and cherished pastime enjoyed by many families. Unfortunately, as almost all Electrical Companies In Dallas will tell you, Halloween can also be one of the most dangerous holidays of the year. The electrical experts at Dallas Electrician, ElectricMan Inc. would like for you and your family to enjoy the ghoulish festivities while practicing electrical safety, so here are a few tips for making the most out of decorating for this exciting time of year.

The Hazards of Halloween Decor

When people talk about Halloween decorations, they’re often thinking about lots of lights combined with smoke machines, spiderwebs and paper decorations, all of which can be cheaply made. The down side of these homemade special effects is that many of these decorations are made of highly flammable material which, if left unattended and in close proximity to electrical lighting, can be anything but fun.

Another problem that often arises from Halloween decorating comes from using electrical lighting and components with electrical wiring that has become cracked and damaged over time. Any cracks in the insulation or damage to the wires can prove frightening and sometimes even deadly. Furthermore, heavy usage of lighting and decorations that require electricity can put a strain on extension cords, power strips and electrical outlets in your home, straining your home’s circuits.

Tips for Safe Decorating

You don’t have to leave the Halloween spirit behind to celebrate safely. Follow these easy-to-remember safety tips when Halloween decorating with your family for the ultimate ghoulish celebration:

Electrical Companies In Dallas That You Can Trust

In over 27 years of electrical experience, ElectricMan Inc. has seen too many families in danger as a result of careless and unnecessary oversights in the use of lighting and electronics. With a little care, a little caution, mixed in with some common sense, your family can enjoy the candy and the costumes and not have to be worried about electrical fires.

For more information on electrical safety and how you can protect your home and your family, or if you need local Electrical Companies In Dallas to help you with any electrical issues you may have,  call ElectricMan Inc. at 972-792-7270 or read more of the wealth of information at the ElectricMan Blog!

Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

Is it time to replace your old dryer? Great news: The federal Energy Star program has started certifying clothes dryers, making it easy to pick out the most cost-effective and efficient models. Read on to find out what the change means and how to pick out the best model for your home.

Moisture and Heat Settings

The upside is clear: “ENERGY STAR certified dryers use 20 percent less energy than conventional models without sacrificing features or performance,” the program promises. So what took so long for dryers to get the federal efficiency stamp of approval?

“With dryers there are fewer major variables to manipulate — mostly it’s drying time and the amount of heat provided,” said Emilio Gonzalez, a Consumer Reports test engineer, so it was harder to find adjustments to meet the standard.

How did manufacturers finally find the extra energy savings?

The savings are not trivial. Energy Star claims that if every household in America switched over, consumers would save a total of $1.5 billion annually in utilities. The reduction in pollution would be the same as taking 2 million cars off the road.

Upgrade the Laundry Room

The first certified models are already available -- find a list of them on the Energy Star directory, which allows you to compare size, fuel type, energy use and other factors.

If you have a gas hookup in your laundry room, consider purchasing a gas-powered dryer. These models have a higher price tag but are more efficient across the board than their electric cousins. No matter what kind of dryer you buy, make sure you adhere to the following tips so you get the most for your money:

Smoke alarms have been required in homes, apartment buildings, and offices for many years. Regulations on carbon monoxide detectors are far more recent, but it’s vital to know whether a potential carbon monoxide leak could make your family members sick. The people at Nest, the same company that brought us the Nest Learning Thermostat, recognized a need for a combination smoke detector and CO detector and created a product that alerts you to danger in a unique way that helps you to feel that your home is protected no matter where you are.

We’ll look at the many benefits of integrated fire alarms and CO detectors in this guide, but be sure to call on a professional for installation. At FB Electrical Services, we’ll make sure that the unit is installed in the most accurate location for smoke and CO detection, that all of the electrical components are working properly, and that the detectors in each room are interconnected.