Kauai’s electrical grid surges affect the life span of our computers, appliances, and other electronic equipment. Power surges can also completely roast the internal electronic parts during a storm or utility fault.

A whole house surge protector installed by a licensed electrician will greatly decrease the risk of power surge destruction.

Blue Sky Electric offers a quality whole panel surge protector for your home or business (parts and labor)

Guarding against surges requires a two-pronged approach: a whole-house suppressor to tame the big, dangerous power spikes and an individual circuit (or “plug-in”) surge suppressor for vulnerable appliances and electronic devices. Both types essentially act like pressure-relief valves. Normally they just sit there, allowing electric current to flow through them. But with higher-than-normal voltage, the devices instantly divert excess voltage to the ground wire. (The best ones react in less than a nanosecond.) As soon as voltage levels return to normal, the flow of electricity is restored, unless the surge was big enough to melt the fuse built into some units.

Typically, whole-house suppressors are hard-wired to the service panel, a process that takes a licensed electrician about two hours. Whole-house systems should be rated to stop a 40,000-amp surge, at minimum. Features to look for include thermal fuses, and lights or alarms that indicate when a device has taken a hit. Protection for an average house with 200-amp service will run about $500 — including a couple of hours of an electrician’s labor. Separate but smaller whole-house units are recommended for the phone and cable lines. These protect fax and answering machines, televisions, and modems.

By themselves, whole-house suppressors can’t stop surges completely; up to 15 percent of excess voltage may leak by. That’s where “plug-in” surge protectors come in. These buffers between individual appliances and wall outlets come in a bewildering array of options and prices. They range from $70 units not much bigger than a computer mouse to $350 units the size of a pizza box that guard all the components in a home theater. But most plug-in models fall into three basic categories: the familiar multi-outlet power strip; the multitasking surge station that can handle phone and cable jacks as well as power cords; and the UPS (uninterruptible power supply), which completely cleanses electric power of random fluctuations and provides a short-term battery backup in case the power dips or goes out entirely. Expect to pay between $20 and $70 for a quality power strip or surge station, and from $100 to $250 for a UPS.

The best Dallas electrician works with everything from large home electrical installations to installations as simple as switches. One popular install for the best Dallas electrician is dimmer switches, which are a favorite in many homes, both for their energy-friendly operation and their style.

Dimmer Switches: Why Install Them in Your Home

Dimmer switches are an inexpensive item that many homeowners love to add to their electrical setup at home for many reasons.

Dimmers save power, decreasing energy usage significantly and resulting in a lower power bill.

They set the mood and a unique ambiance to a home, whether it’s in the kitchen or the bedroom.

They’re easy to install, even for homeowners.

Dimmer Switch Installation Tips

Even an easy installation can turn tricky, which is why you should call your local electrician to ensure that your dimmer switch install is done correctly. Still, if you feel comfortable doing the installation yourself, here are some tips for a smooth and pain-free dimmer switch installation.

Check the wattage limits on switches to prevent overheating and overloading of the circuits. Dimmers can handle anywhere from 600 to, in some cases, 2,000 watts of power. The key is to not run too many lights on the switch and risk overheating or overloading it, which can be dangerous. You will know if there is something wrong with one of those scenarios if, when you touch the dimmer after installing it and running it, it’s hot to the touch. Warm is normal; hot is not. This is one of the reasons why you should consider calling the best Dallas electrician to help oversee your installation.

Make sure that there are no other dimmers connected to the same circuit. Much like having too many appliances in the same circuit can be a danger, too many dimmers can cause overloading that results in dangerous circumstances and costly repairs.

Never use fluorescent bulbs with dimmer switches. Fluorescent bulbs will not work with dimmer switches. If you really want to use fluorescent lights, you can find some for a pretty hefty price that will run on dimmers.

Ordinary dimmer switches cannot run devices that rely on a motor, like ceiling fans. Ceiling fans are set to run at a specific, predetermined wattage and therefore they are not compatible with dimmer switches, which gradually adjust wattage.

Older styles of dimmers can sometimes interfere with audio equipment, creating a humming or whining noise. The best Dallas electrician can quickly recognize this as a sign that the dimmers are too old. To resolve this issue, you must either install a new dimmer or install a noise filter.

ElectricMan: Answering Your Dimmer Switch Questions

With over 27 years of experience with installations great and small, the best Dallas electrician team at ElectricMan can answer all of your dimmer switch questions and install your dimmer switches properly, quickly, and efficiently. To learn more about our services, visit us here or connect with us on any of our social sites. And if you ever have any questions, please feel free to call us at 972-792-7270 or use the Contact form on our website!

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Have you recently had a new shop built on your property? Maybe you are thinking of having a pole building erected to keep your car or other outdoor equipment in it throughout the winter. Did you know that the electrical portion of the building is a separate job altogether in most cases? If you were hoping to have lights, use electrical equipment or plug in your iPod dock, you need to have electricity run to the building. This is typically a job you will have to hire out yourself. Meaning, it is up to you to find the right Los Angeles electrician to complete the job. Customers from around the area have been counting on The Electric Connection to handle their electrical needs and have been very satisfied.

When you are choosing the right electrician in Los Angeles to handle the job, you will want to have a conversation about what is needed for your shop. The size of the building and what kind of equipment you plan on using in the building are going to play a role in what you need. Typically, a separate structure like a shop will require its own electrical box. This is something that will absolutely require the experience and expertise of a certified electrician. Los Angeles homeowners will need to hire a certified professional in order to obtain the proper permits and sign-offs that make the new building legal and up to code.

Your shop or new garage won’t be complete without electricity. Talk with a qualified electrician today to learn more about your options as well as the expected cost. The investment will be well worth it and you will appreciate the flexibility a shop with electricity gives you versus one without it. Give The Electric Connection a call today and schedule your consultation.