Do you find energy conservation confusing? You're not alone. According to a recent study, Americans are by-and-large misinformed about what household appliances consume the most electricity. As a result, homeowners who wish to cut down on the energy they use in their home electrical work might find themselves spending time and resources to improve efficiency in areas where they won't see big gains. Read on to learn more about where most of our energy goes and how you can get the biggest payback for your conservation efforts.

The Failings of Cognitive Accessibility

In general, Americans tend to overestimate the amount of power that is devoted to common home devices like computers, television and lighting, while underestimating the amount of energy that is consumed by bigger ticket items like heat, air conditioning and hot water heating. That's because we confuse the amount of time we spend actively using a specific device with how much power it uses.

“Consumers tend to use the frequency with which they think or interact with a given energy source as a proxy for its consumption,” Ohio State University psychology doctoral student Dan Schley, lead author of the study, said to the Washington Post. For example, someone who spends eight hours a day working on a computer might naturally be inclined to think that device is what's driving up the electricity bill.

How to Make Your Actions Count

However, it turns out that the energy consumed by common electronics is dwarfed by what goes into major appliances. According to the U.S. Department of Energy, a whopping 48 percent of energy in the average home goes toward heating and air conditioning. The hot water heater takes the next largest individual chunk, at 17.7 percent. The refrigerator uses 13.7 percent, with all other appliances and electronics accounting for about 21 percent of the total.

The upshot? If you really want to cut back on consumption in your home electrical work, you need to target the biggest guzzlers. That means making interventions like installing smart thermostats, turning down your water heater temperature and beefing up the insulation in your home. The simplest, most effective change that most families can make is to bump the thermostat down a few degrees in the winter and up a few degrees in the summer.

Don't Neglect the Small Stuff

That's not to say you should ignore simple behavioral changes that can save money in other areas of your home electrical work – things like unplugging devices when they aren't in use, installing energy efficient cable boxes, using the power-saving settings on your computer and turning off the lights when you aren't in the room. Just treat these items as the appetizers and desserts of your energy-saving strategy, rather than the main course.

If you need help identifying the largest loads on your home electrical work, arrange for a visit from an expert electrician today.

In most offices, hallways, and other lower level and flat ceiling environments you will find some sort of tube lighting in place. The most common technology that is found to be used is currently fluorescent, but after this post that might slowly change for some because this alternatives to fluorescent office lighting and all of those other uses listed above is going to change your mind on which technology is the truly efficient one.

Although it is completely harmless while in the tube itself, accidents always happen. When a fluorescent tube is broken, a LED fluorescent tube alternative, you will skip this issue entirely because LED technology does not require any sort of mercury to work!

While LED technology is pretty much good to go in a greater range of temperatures, fluorescent lamps only works at it’s peak performance when it is in room temperature type environments. So LED technology is much more flexible in which temperatures it can operate properly at, fluorescents are only suitable for inside only applications. But even then, LED still wins for all of these other reasons listed on this post! And a thing to remember is that fluorescent technology isn’t better than LED is indoors, it’s just that it only works optimally at room temperatures. But when you replace fluorescent light with LED, you still get all the benefits that LED brings and they aren’t picky about the temperature at all.

When you hear the words non-directional, what exactly does that mean to you? Well, in the world of lighting it basically means that such fixture emits lights 360 degrees (or in all directions). This causes 30-40% of all the light being emitted by a fluorescent tube to be wasted due to the trait it carries of non-directional emission of light. With LED, it has directional lighting which allows you to direct the light where it needs to go and isn’t going to waste being emitted 360 degrees.

Let alone all of the other benefits that a a return on investment when you start looking at what contact us with any questions you have!

‘Tis the season to be jolly with thousands of colorful lights glowing from your trees, gutters, front door wreath, and bushes. Billions of lights will be used to dress up homes and businesses throughout the country during the final months of the year. As festive as the light-up Santa and Rudolph may look on top of your roof, you have to make electrical safety the focus of your holiday lighting festivities.

Following are five tips to help you avoid common holiday lighting problems others will experience this year. Commit them to memory so electrical safety does not pull the plug on your merry-making décor this year:

1. If you are putting up a live Christmas tree, make sure it is well-watered and use LED bulbs for all decorations placed on the tree. Dry trees and heat from non-LED bulbs create home fires every holiday season. Do not place candles where they may be knocked over on a live tree. LED bulbs should be used when decorating trees in your outdoor landscape as well.

2. Thoroughly inspect every string of lights and plug-in points before using them indoors or outdoors. If you notice any of the following at even one point on the string, toss it out or repair the damage before use to ensure electrical safety for your home:

3. Power cords should be used to connect strings of lights, but pay attention to how many strings you are connecting per cord. In general, more than three strings of lights could be too much.

4. Avoid hanging your lights with tacks, screws, or nails. You do not want to crack, tear, or otherwise damage the electric cord. You can use insulated hooks instead.

5. Make sure you are plugging outdoor lighting features into ground fault circuit interrupter outlets. These outlets reduce the risk of electrical shorts or dangerous shocks if water, wet leaves, and other outdoor elements get into the sockets.

6. Do not use indoor-only holiday lights outdoors. There are clear differences in how these types of lights are made, even if they look the same. For instance, outdoor lights are created with more insulation so they are not as easily affected by rain and snow.

Do not allow electrical safety to cut the cord on your holiday lighting festivities. Light up the house and allow the big snowman to wave at the neighbors from your front lawn. Just make sure your snow globes, trains, and twinkling tree lights present no danger to your home, your family, and your neighborhood.